Bearings, units and housings -- Super-precision bearings -- Angular contact ball bearings -- Angular contact ball bearings, super-precision -- SKF 7010 CE/P4AL
7010 CE/P4AL
Dimensions
| d | 50 | mm | |
| D | 80 | mm | |
| B | 16 | mm | |
| d1 | 60.25 | mm | |
| d2 | 57.9 | mm | |
| D1 | 69.75 | mm | |
| b | 1.7 | mm | |
| C1 | 8.6 | mm | |
| C2 | 2.7 | mm | |
| C3 | 3 | mm | |
| r1,2 | min. | 1 | mm |
| r3,4 | min. | 0.6 | mm |
| a | 16.8 | mm |
Abutment dimensions
| da | min. | 54.6 | mm |
| db | min. | 54.6 | mm |
| Da | max. | 75.4 | mm |
| Db | max. | 75.8 | mm |
| ra | max. | 1 | mm |
| rb | max. | 0.6 | mm |
| dn | 62.3 | mm |
Calculation data
| Basic dynamic load rating | C | 15.6 | kN | |
| Basic static load rating | C0 | 10.6 | kN | |
| Fatigue load limit | Pu | 0.45 | kN | |
| Attainable speed for grease lubrication | 25000 | r/min | ||
| Attainable speed for oil-air lubrication | 38000 | r/min | ||
| Ball diameter | Dw | 7.938 | mm | |
| Number of balls | z | 21 | ||
| Reference grease quantity | Gref | 4.1 | cm³ | |
| Preload and stiffness (back-to-back, face-to-face) | ||||
| Preload class A | GA | 85 | N | |
| Static axial stiffness, preload class A | 42 | N/µm | ||
| Preload class B | GB | 250 | N | |
| Static axial stiffness, preload class B | 65 | N/µm | ||
| Preload class C | GC | 500 | N | |
| Static axial stiffness, preload class C | 88 | N/µm | ||
| Calculation factors | ||||
| Calculation factor | f | 1.08 | ||
| Calculation factor | f1 | 1 | ||
| Calculation factor | f2A | 1 | ||
| Calculation factor | f2B | 1.03 | ||
| Calculation factor | f2C | 1.05 | ||
| Calculation factor | fHC | 1 | ||
| Calculation factor | f0 | 8.2 | ||
Mass
| Mass bearing | 0.25 | kg |