Bearings, units and housings -- Super-precision bearings -- Angular contact ball bearings -- Angular contact ball bearings, super-precision -- SKF 7015 CB/P4AL
7015 CB/P4AL
Dimensions
| d | 75 | mm | |
| D | 115 | mm | |
| B | 20 | mm | |
| d1 | 90 | mm | |
| d2 | 88.2 | mm | |
| D2 | 102.8 | mm | |
| b | 1.5 | mm | |
| C1 | 10.9 | mm | |
| C2 | 4.4 | mm | |
| C3 | 2.9 | mm | |
| r1,2 | min. | 1.1 | mm |
| r3,4 | min. | 0.6 | mm |
| a | 22.3 | mm |
Abutment dimensions
| da | min. | 81 | mm |
| db | min. | 81 | mm |
| Da | max. | 109 | mm |
| Db | max. | 111.8 | mm |
| ra | max. | 1 | mm |
| rb | max. | 0.6 | mm |
| dn | 91.1 | mm |
Calculation data
| Basic dynamic load rating | C | 26.5 | kN | |
| Basic static load rating | C0 | 29 | kN | |
| Fatigue load limit | Pu | 0.75 | kN | |
| Attainable speed for grease lubrication | 16000 | r/min | ||
| Attainable speed for oil-air lubrication | 24000 | r/min | ||
| Ball diameter | Dw | 7.938 | mm | |
| Number of balls | z | 30 | ||
| Reference grease quantity | Gref | 7.7 | cm³ | |
| Preload and stiffness (back-to-back, face-to-face) | ||||
| Preload class A | GA | 65 | N | |
| Static axial stiffness, preload class A | 50 | N/µm | ||
| Preload class B | GB | 130 | N | |
| Static axial stiffness, preload class B | 65 | N/µm | ||
| Preload class C | GC | 390 | N | |
| Static axial stiffness, preload class C | 104 | N/µm | ||
| Calculation factors | ||||
| Calculation factor | f | 1.08 | ||
| Calculation factor | f1 | 1 | ||
| Calculation factor | f2A | 1 | ||
| Calculation factor | f2B | 1.02 | ||
| Calculation factor | f2C | 1.05 | ||
| Calculation factor | fHC | 1 | ||
| Calculation factor | f0 | 9.7 | ||
Mass
| Mass bearing | 0.7 | kg |