Bearings, units and housings -- Super-precision bearings -- Angular contact ball bearings -- Angular contact ball bearings, super-precision -- SKF 7018 CE/P4AL1
7018 CE/P4AL1
Dimensions
| d | 90 | mm | |
| D | 140 | mm | |
| B | 24 | mm | |
| d1 | 108.33 | mm | |
| d2 | 105.5 | mm | |
| D1 | 121.66 | mm | |
| b | 1.8 | mm | |
| C1 | 7.6 | mm | |
| C2 | 4.3 | mm | |
| C3 | 4.3 | mm | |
| r1,2 | min. | 1.5 | mm |
| r3,4 | min. | 1 | mm |
| a | 27.5 | mm |
Abutment dimensions
| da | min. | 97 | mm |
| db | min. | 97 | mm |
| Da | max. | 133 | mm |
| Db | max. | 134.4 | mm |
| ra | max. | 1.5 | mm |
| rb | max. | 1 | mm |
| dn | 111 | mm |
Calculation data
| Basic dynamic load rating | C | 35.8 | kN | |
| Basic static load rating | C0 | 32 | kN | |
| Fatigue load limit | Pu | 1.27 | kN | |
| Attainable speed for grease lubrication | 13300 | r/min | ||
| Attainable speed for oil-air lubrication | 21000 | r/min | ||
| Ball diameter | Dw | 11.112 | mm | |
| Number of balls | z | 28 | ||
| Reference grease quantity | Gref | 14 | cm³ | |
| Preload and stiffness (back-to-back, face-to-face) | ||||
| Preload class A | GA | 190 | N | |
| Static axial stiffness, preload class A | 79 | N/µm | ||
| Preload class B | GB | 580 | N | |
| Static axial stiffness, preload class B | 125 | N/µm | ||
| Preload class C | GC | 1150 | N | |
| Static axial stiffness, preload class C | 171 | N/µm | ||
| Calculation factors | ||||
| Calculation factor | f | 1.1 | ||
| Calculation factor | f1 | 1 | ||
| Calculation factor | f2A | 1 | ||
| Calculation factor | f2B | 1.03 | ||
| Calculation factor | f2C | 1.05 | ||
| Calculation factor | fHC | 1 | ||
| Calculation factor | f0 | 9.6 | ||
Mass
| Mass bearing | 1.2 | kg |