Bearings, units and housings -- Super-precision bearings -- Angular contact ball bearings -- Angular contact ball bearings, super-precision -- SKF 7020 CB/P4AL
7020 CB/P4AL
Dimensions
| d | 100 | mm | |
| D | 150 | mm | |
| B | 24 | mm | |
| d1 | 118.7 | mm | |
| d2 | 116.15 | mm | |
| D2 | 135 | mm | |
| b | 2.2 | mm | |
| C1 | 13.4 | mm | |
| C2 | 5.2 | mm | |
| C3 | 4.2 | mm | |
| r1,2 | min. | 1.5 | mm |
| r3,4 | min. | 1 | mm |
| a | 28.9 | mm |
Abutment dimensions
| da | min. | 107 | mm |
| db | min. | 107 | mm |
| Da | max. | 143 | mm |
| Db | max. | 145.4 | mm |
| ra | max. | 1.5 | mm |
| rb | max. | 1 | mm |
| dn | 120 | mm |
Calculation data
| Basic dynamic load rating | C | 37.7 | kN | |
| Basic static load rating | C0 | 45.5 | kN | |
| Fatigue load limit | Pu | 1.02 | kN | |
| Attainable speed for grease lubrication | 11000 | r/min | ||
| Attainable speed for oil-air lubrication | 17000 | r/min | ||
| Ball diameter | Dw | 10.319 | mm | |
| Number of balls | z | 27 | ||
| Reference grease quantity | Gref | 15.34 | cm³ | |
| Preload and stiffness (back-to-back, face-to-face) | ||||
| Preload class A | GA | 96 | N | |
| Static axial stiffness, preload class A | 58 | N/µm | ||
| Preload class B | GB | 190 | N | |
| Static axial stiffness, preload class B | 76 | N/µm | ||
| Preload class C | GC | 570 | N | |
| Static axial stiffness, preload class C | 120 | N/µm | ||
| Calculation factors | ||||
| Calculation factor | f | 1.08 | ||
| Calculation factor | f1 | 1 | ||
| Calculation factor | f2A | 1 | ||
| Calculation factor | f2B | 1.02 | ||
| Calculation factor | f2C | 1.05 | ||
| Calculation factor | fHC | 1 | ||
| Calculation factor | f0 | 9.8 | ||
Mass
| Mass bearing | 1.36 | kg |