

| d | 40 | mm | |
| D | 80 | mm | |
| B1 | 24.2 | mm | |
| B | 18 | mm | |
| d1 | ≈ | 52.6 | mm |
| d2 | 48 | mm | |
| D1 | ≈ | 69.8 | mm |
| D2 | 75.06 | mm | |
| D3 | 76.81 | mm | |
| C | 3.28 | mm | |
| b | 1.9 | mm | |
| r0 | 0.6 | mm | |
| r1,2 | min. | 1.1 | mm |
| L | 571.1 | mm | |
| ± | 10 | mm |

| da | min. | 46.5 | mm |
| db | min. | 46.5 | mm |
| db | max. | 47.4 | mm |
| Da | max. | 73.5 | mm |
| ra | max. | 1 | mm |
| Cable connector type | AMP Superseal | |||
| Number of pulses per revolution | N | 80 | ||
| Period accuracy | ± | 5 | % | |
| Phase shift output signal | 90 | ° | ||
| Tolerance phase shift output signal | ± | 30 | ° | |
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed | 5600 | r/min | ||
| Calculation factor | kr | 0.025 | ||
| Calculation factor | f0 | 14 |
| Mass sensor unit | 0.46 | kg |
| Snap ring | SP 80 | |||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 20x40x7 HMS5 V | 20 | 40 | 7 | Seals |
|---|---|---|---|---|
| 24124 CCK30/W33 | 120 | 200 | 80 | Bearings, units and housings |
| 42x62x8 HMSA10 V | 42 | 62 | 8 | Seals |
| 6004/VA201 | 20 | 42 | 12 | Bearings, units and housings |
| FSAF 1517 T | 74.6125 | - | - | Bearings, units and housings |
| N 1016 KTNHA/HC5SP | 80 | 125 | 22 | Bearings, units and housings |
| KMT 3 | 18 | - | 17 | Bearings, units and housings |
| NKX 50 Z | 50 | 62 | 35 | Bearings, units and housings |
| PCM 505560 M | 50 | 55 | 60 | Bearings, units and housings |
| PCMF 141617 E | 14 | 16 | 17 | Bearings, units and housings |
| PRM 808540 | 80 | 85 | 40 | Bearings, units and housings |
| TUJ 505 | - | - | - | Bearings, units and housings |
Hot number:
12x28x7 HMSA10 RG
3308 DMA
40x55x8 HMSA10 RG
6008-2RZ
61806
85491
BT4B 328952 A/HA1
FYR 3 7/16-3
GB 3017
NUP 2207 ECP
SAF 22609-210
SAF 22618 x 3.1/8
SAF 22640 T
SILR 50 ES
YAT 206-102
Previous:BMB-6208/080S2/UB008A Bearings, units and housings ---- Next:BMB-6209/080S2/UB008A Bearings, units and housings
Return to SKF bearing