da | 66.675 | mm | |
Da | 140 | mm | |
Ca | 42.799 | mm | |
A1 | 88.9 | mm | |
A2 | 209.55 | mm | |
ba | 30.163 | mm | |
H | 169.863 | mm | |
H1 | 88.9 | mm | |
H2 | 31.75 | mm | |
J | min. | 244.475 | mm |
J | max. | 279.4 | mm |
J1 | 53.975 | mm | |
L | 330.2 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 53.181 | mm | |
R2 | 21.431 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 33.337 | mm |
Housing |
FSAF 516
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1616
|
|||
Taconite seal | TER 43 | |||
|
End plug (suffix Y) |
EPR 8
|
Max. speed for Taconite seal | 1150 | r/min |
P60° | 60.5 | kN | |
P90° | 36 | kN | |
P120° | 21.8 | kN | |
P150° | 19.6 | kN | |
P180° | 23.1 | kN | |
Pa | 6.23 | kN |
Mass pillow block | 16.8 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 175.77 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
25x45x7 HMS5 RG | 25 | 45 | 7 | Seals |
---|---|---|---|---|
390 VRME R | 381 | - | - | Seals |
70x92x12 HMSA10 V | 70 | 92 | 12 | Seals |
7311 BECBY | 55 | 120 | 29 | Bearings, units and housings |
89948 | - | - | 49.987 | Seals |
AOH 24096 | 460 | 480 | 250 | Bearings, units and housings |
AOH 32/710 G | 670 | 710 | 515 | Bearings, units and housings |
BS2-2222-2RS5K/VT143 | 110 | 200 | 63 | Bearings, units and housings |
FYK 504 | - | - | - | Bearings, units and housings |
NJ 220 ECP | 100 | 180 | 34 | Bearings, units and housings |
NNCF 5009 CV | 45 | 75 | 40 | Bearings, units and housings |
NUP 213 ECP | 65 | 120 | 23 | Bearings, units and housings |
Hot number:
15975
22311 E/VA405
23654
32380
6202-RSH
6304/VA201
75x100x12 HMS5 V
90792
D/W R144 R
FSAF 22515 x 2.1/2
LL 566848/810/HA1
NU 340 ECML
PFD 25 WF
SAFS 22520-11 x 3.3/8 TLC
SAFS 22544 x 7.1/2 T
Previous:FSAF 1516 x 2.5/8 Bearings, units and housings ---- Next:FSAF 1516 x 2.5/8 TLC Bearings, units and housings
Return to SKF bearing