da | 77.787 | mm | |
Da | 160 | mm | |
Ca | 49.809 | mm | |
A1 | 98.425 | mm | |
A2 | 149.225 | mm | |
ba | 34.925 | mm | |
H | 192.484 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
J1 | 53.975 | mm | |
L | 349.25 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing |
FSAF 518
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1518
|
|||
Labyrinth ring |
2 x LOR 186
|
|||
|
End plug (suffix Y) |
EPR 11
|
Bearing limiting speed | 5300 | r/min |
P60° | 101 | kN | |
P90° | 60.9 | kN | |
P120° | 38.3 | kN | |
P150° | 34.7 | kN | |
P180° | 42.3 | kN | |
Pa | 8.1 | kN |
Mass pillow block | 21.3 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 286.33 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
22232-2CS5/VT143 | 160 | 290 | 80 | Bearings, units and housings |
---|---|---|---|---|
2450 | 6.35 | 12.67 | 4.78 | Seals |
36147 | 92.075 | 107.696 | 9.652 | Seals |
470466 | 453 | - | - | Seals |
48x70x8 CRW1 V | 48 | 70 | 8 | Seals |
61919 | 95 | 130 | 18 | Bearings, units and housings |
6304 N | 20 | 52 | 15 | Bearings, units and housings |
71914 ACB/HCP4AL | 70 | 100 | 16 | Bearings, units and housings |
7313 BEGBM | 65 | 140 | 33 | Bearings, units and housings |
82559 | 209.55 | 260.35 | 15.88 | Seals |
FSAF 1520 x 3.1/2 | 88.9 | - | - | Bearings, units and housings |
FSE 513-611 | 55.5625 | - | - | Bearings, units and housings |
Hot number:
18693
240/750 BC
3688
470611
607-RSH
61900
61912-2RS1
90802
BT2B 328339/HA4
FYTB 1.15/16 LDW
NJ 2209 ECP
KMTA 5
SNL 615 TURU
SNW 22x4
W 61909-2RS1
Previous:FSAF 1518 TLC Bearings, units and housings ---- Next:FSAF 1518 x 3.1/16 T Bearings, units and housings
Return to SKF bearing