da | 82.55 | mm | |
Da | 160 | mm | |
Ca | 49.809 | mm | |
A1 | 98.425 | mm | |
A2 | 149.225 | mm | |
ba | 34.925 | mm | |
H | 192.484 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
J1 | 53.975 | mm | |
L | 349.25 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing |
FSAF 518
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1518
|
|||
Labyrinth ring |
2 x LOR 189
|
|||
|
End plug (suffix Y) |
EPR 11
|
Bearing limiting speed | 5300 | r/min |
P60° | 101 | kN | |
P90° | 60.9 | kN | |
P120° | 38.3 | kN | |
P150° | 34.7 | kN | |
P180° | 42.3 | kN | |
Pa | 8.1 | kN |
Mass pillow block | 21.3 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 286.33 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
2850565 | 723.9 | 774.7 | 22.23 | Seals |
---|---|---|---|---|
470376 | 367 | - | - | Seals |
529130 | 1301.75 | - | - | Seals |
593629 | 298.45 | - | - | Seals |
7315 BECBJ | 75 | 160 | 37 | Bearings, units and housings |
99640 | 170 | 182.5752 | 37.9984 | Seals |
K 20x24x10 | 20 | 24 | 10 | Bearings, units and housings |
N 1012 KTNHA/SP | 60 | 95 | 18 | Bearings, units and housings |
PWM 809080 | 80 | 90 | 80 | Bearings, units and housings |
RNA 2206.2RS | 35 | 62 | 19.8 | Bearings, units and housings |
SSAFS 22526 x 4.5/16 | 109.5375 | - | - | Bearings, units and housings |
W 605 R-2Z | 5 | 14 | 5 | Bearings, units and housings |
Hot number:
12x19x5 HMS5 RG1
34x48x8 HMSA10 V
408703
410603
4932
609-2RSL
650 VL V
86716
GEH 10 C
PFT 17 RM
PRMF 252815
S71912 ACB/HCP4A
SNP 3284x15.3/4
YAR 208-108-2FW/VA201
YAT 206
Previous:FSAF 1518 x 3.1/16 T Bearings, units and housings ---- Next:FSAF 1518 x 3.1/4 T Bearings, units and housings
Return to SKF bearing