da | 85.725 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 222.25 | mm | |
ba | 38.894 | mm | |
H | 217.488 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
J1 | 60.325 | mm | |
L | 387.35 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 58.737 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.069 | mm |
Housing |
FSAF 520
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1520
|
|||
Taconite seal | TER 101 | |||
|
End plug (suffix Y) |
EPR 12
|
Max. speed for Taconite seal | 900 | r/min |
P60° | 119 | kN | |
P90° | 71.2 | kN | |
P120° | 44.5 | kN | |
P150° | 40 | kN | |
P180° | 48.9 | kN | |
Pa | 10.2 | kN |
Mass pillow block | 28.1 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 365.71 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
100x145x12 HMSA10 RG | 100 | 145 | 12 | Seals |
---|---|---|---|---|
24044 CCK30/W33 | 220 | 340 | 118 | Bearings, units and housings |
48x68x10 HMSA10 V | 48 | 68 | 10 | Seals |
51412 M | 60 | 130 | 51 | Bearings, units and housings |
534953 | 22.225 | 41.25 | 6.502 | Seals |
61864 | 320 | 400 | 38 | Bearings, units and housings |
71832 CD/HCP4 | 160 | 200 | 20 | Bearings, units and housings |
850 VL R | 785 | - | - | Seals |
TQO design | 330.2 | 444.5 | - | Bearings, units and housings |
NA 2200.2RS | 10 | 30 | 13.8 | Bearings, units and housings |
NU 2084 ECMA | 420 | 620 | 118 | Bearings, units and housings |
PL 56 | - | - | 29.3624 | Bearings, units and housings |
Hot number:
1203 ETN9
23936 CCK/W33
405903
7411 BGM
90884
99138
BT4B 334116 G/HA1VA901
C 2212 TN9
NNC 4934 CV
OKC 590
PCMF 202315 E
S7014 CB/HCP4A
S7022 CB/P4A
SYFJ 50 TF
W 61816-2RS1
Previous:FSAF 1520 x 3.3/8 Bearings, units and housings ---- Next:FSAF 1520 x 3.5/16 T Bearings, units and housings
Return to SKF bearing