da | 66.675 | mm | |
Da | 170 | mm | |
Ca | 67.793 | mm | |
A1 | 98.425 | mm | |
ba | 36.513 | mm | |
H | 209.55 | mm | |
H1 | 107.95 | mm | |
H2 | 44.45 | mm | |
J | min. | 269.875 | mm |
J | max. | 320.675 | mm |
J1 | 53.975 | mm | |
L | 361.95 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 63.5 | mm | |
R2 | 26.988 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 46.038 | mm |
Housing |
FSAF 616
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1616
|
|||
Taconite seal | TER 43 | |||
|
End plug (suffix Y) |
EPR 10
|
Max. speed for Taconite seal | 1150 | r/min |
P60° | 93 | kN | |
P90° | 55.6 | kN | |
P120° | 33.8 | kN | |
P150° | 30.7 | kN | |
P180° | 36.9 | kN | |
Pa | 9.43 | kN |
Mass pillow block | 29.8 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 365.71 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
15004 | 38.1 | 60.3 | 7.95 | Seals |
---|---|---|---|---|
32x72x7 HMSA10 RG | 32 | 72 | 7 | Seals |
55x100x12 HMSA10 V | 55 | 100 | 12 | Seals |
6005/HR11QN | 25 | 47 | 12 | Bearings, units and housings |
7212 ACD/P4A | 60 | 110 | 22 | Bearings, units and housings |
87737/87111 | 187.325 | 282.575 | 50.8 | Bearings, units and housings |
FSYE 2 3/4 N | 69.85 | - | - | Bearings, units and housings |
NU 1014 ECP | 70 | 110 | 20 | Bearings, units and housings |
OKBS 124 | 124 | - | - | |
SAF 23024 KAT x 4.1/8 | 103.1875 | - | - | Bearings, units and housings |
SSAFS 22538 x 7 TLC | 177.8 | - | - | Bearings, units and housings |
SSAFS 23048 KAT x 8.15/16 | 227.0125 | - | - | Bearings, units and housings |
Hot number:
130x170x12 HMS5 V
23184
40x65x10 HMSA10 V
49920
6308-RS1
BT2B 328466/HA1
K 15x19x13
K 89315 TN
NU 30/1120 ECMA
OKBS 81
OKC 050
PCMW 386201.5 M
SAFS 22230 TLC
SSAFS 22340 TLC
SYFWK 1.1/4 ALTA
Previous:FSAF 1616 x 2.5/8 Bearings, units and housings ---- Next:FSAF 1616 x 2.5/8 TLC Bearings, units and housings
Return to SKF bearing