da | 68.263 | mm | |
Da | 140 | mm | |
Ca | 42.799 | mm | |
A1 | 88.9 | mm | |
A2 | 209.55 | mm | |
S | 4.763 | mm | |
ba | 34.131 | mm | |
H | 169.863 | mm | |
H1 | 88.9 | mm | |
H2 | 31.75 | mm | |
J | min. | 244.475 | mm |
J | max. | 279.4 | mm |
J1 | 53.975 | mm | |
L | 330.2 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 53.181 | mm | |
R2 | 21.431 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 31.75 | mm |
Housing |
FSAF 516
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-16-13
|
|||
Taconite seal | TER 44 | |||
|
End plug (suffix Y) |
EPR 8
|
Max. speed for Taconite seal | 1150 | r/min |
P60° | 60.5 | kN | |
P90° | 36 | kN | |
P120° | 21.8 | kN | |
P150° | 19.6 | kN | |
P180° | 23.1 | kN | |
Pa | 7.83 | kN |
Mass pillow block | 17.4 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 87.885 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
18695 | 47.625 | 70.66 | 11.13 | Seals |
---|---|---|---|---|
27x42x10 HMS5 RG | 27 | 42 | 10 | Seals |
407252 | 670 | - | - | Seals |
530x576x21 HS8 R | 530 | 576 | 21 | Seals |
61812-2RS1 | 60 | 78 | 10 | Bearings, units and housings |
708 ACE/P4A | 8 | 22 | 7 | Bearings, units and housings |
GEP 630 FS | 630 | 900 | 450 | Bearings, units and housings |
NF 3084 ECMB | 420 | 620 | 150 | Bearings, units and housings |
OKC 720 | 720 | - | ||
PPMF 151712 | 15 | 17 | 12 | Bearings, units and housings |
S71910 ACD/HCP4A | 50 | 72 | 12 | Bearings, units and housings |
YARAG 210-115 | 49.213 | 90 | 51.6 | Bearings, units and housings |
Hot number:
1100230
20643
403603
550 VL V
6206
62x90x10 HMS5 V
71805 ACD/HCP4
7217 BECBP
BT2B 328361/HA1
BT4B 334128/HA1
NJ 221 ECML
HM 30/500
NJ 313 ECM
NU 213 ECJ
SNW 121x3.11/16
Previous:FSAF 22516 Bearings, units and housings ---- Next:FSAF 22516 TLC Bearings, units and housings
Return to SKF bearing