da | 74.612 | mm | |
Da | 150 | mm | |
Ca | 45.796 | mm | |
A1 | 88.9 | mm | |
A2 | 127 | mm | |
S | 4.763 | mm | |
ba | 35.719 | mm | |
H | 182.166 | mm | |
H1 | 95.25 | mm | |
H2 | 31.75 | mm | |
J | min. | 250.825 | mm |
J | max. | 279.4 | mm |
J1 | 53.975 | mm | |
L | 330.2 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 53.975 | mm | |
R2 | 22.225 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 34.925 | mm |
Housing |
FSAF 517
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-17-14
|
|||
Labyrinth ring |
2 x LOR 53
|
|||
|
End plug (suffix Y) |
EPR 9
|
Bearing limiting speed | 5600 | r/min |
P60° | 61.4 | kN | |
P90° | 36.9 | kN | |
P120° | 23.1 | kN | |
P150° | 20.9 | kN | |
P180° | 25.4 | kN | |
Pa | 9.25 | kN |
Mass pillow block | 17.9 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 110.56 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1224 KM | 120 | 215 | 42 | Bearings, units and housings |
---|---|---|---|---|
26x38x5 HMSA10 V | 26 | 38 | 5 | Seals |
32x52x8 CRW1 V | 32 | 52 | 8 | Seals |
52208 | 30 | 68 | 36 | Bearings, units and housings |
61809-2RS1 | 45 | 58 | 7 | Bearings, units and housings |
626-Z | 6 | 19 | 6 | Bearings, units and housings |
91386 | - | - | 28 | Seals |
FY 1.7/16 FM | 36.513 | - | - | Bearings, units and housings |
FY 40 FM | 40 | - | - | Bearings, units and housings |
MVR1-17 | 17 | 32 | - | Seals |
PCZ 1212 E | 19.05 | 22.225 | 19.05 | Bearings, units and housings |
SAF 22634 x 5.7/8 TLC | 149.225 | - | - | Bearings, units and housings |
Hot number:
30307
471301
61860 MA
619/1120 MB
619/8-2Z
6219-2Z/VA201
71914 ACE/P4AL
85931
C 3292 MB
D/W ER1634-2ZS
FYC 45 TF
KMT 0
MS 31/630
RLS 4-2Z
YSP 206 SB-2F
Previous:FSAF 22516 x 2.5/8 TLC Bearings, units and housings ---- Next:FSAF 22517 T Bearings, units and housings
Return to SKF bearing