da | 85.725 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 152.797 | mm | |
S | 4.763 | mm | |
ba | 44.45 | mm | |
H | 217.488 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
J1 | 60.325 | mm | |
L | 387.35 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 58.737 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.069 | mm |
Housing |
FSAF 520
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-20-17
|
|||
Labyrinth ring |
2 x LOR 101
|
|||
|
End plug (suffix Y) |
EPR 15
|
Bearing limiting speed | 4500 | r/min |
P60° | 119 | kN | |
P90° | 71.2 | kN | |
P120° | 44.5 | kN | |
P150° | 40 | kN | |
P180° | 48.9 | kN | |
Pa | 13.8 | kN |
Mass pillow block | 28.1 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1150112 | 292.1 | 323.85 | 15.88 | Seals |
---|---|---|---|---|
1206 EKTN9 | 30 | 62 | 16 | Bearings, units and housings |
1311 EKTN9 + H 311 | 50 | 120 | 29 | Bearings, units and housings |
14x28x7 HMS5 RG | 14 | 28 | 7 | Seals |
16076 MA | 380 | 560 | 57 | Bearings, units and housings |
21x35x7 CRW1 V | 21 | 35 | 7 | Seals |
58x80x8 HMS5 V | 58 | 80 | 8 | Seals |
7317 BEGAPH | 85 | 180 | 41 | Bearings, units and housings |
FYTB 1.1/2 TDW | 38.1 | - | - | Bearings, units and housings |
NA 4903 RS | 17 | 30 | 14 | Bearings, units and housings |
OH 3064 H | 300 | 320 | 171 | Bearings, units and housings |
PWKR 35.2RS | - | 35 | 52 | Bearings, units and housings |
Hot number:
13415
23984 CCK/W33
25x45x7 HMS5 V
3209 A-2RS1
314419
55x80x8 CRW1 V
6139
71915 ACE/HCP4A
87067
FBSA 212 A/QBC
N 1020 KTNHA/HC5SP
NNUD 6056 ECMAS/P53
OH 31/800 H
SAF 23036 KA x 6.3/8
SYNT 65 FW
Previous:FSAF 22520 x 3.1/2 TLC Bearings, units and housings ---- Next:FSAF 22520 x 3.3/8 T Bearings, units and housings
Return to SKF bearing