Housing material | Cast iron |
d | 36.513 | mm | |
A | 34.5 | mm | |
A1 | 13 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 22 | mm | |
B1 | 39.5 | mm | |
Da | H11 | 106.4 | mm |
Db1 | 87 | mm | |
Db2 | 95 | mm | |
J | 92 | mm | |
L | 118 | mm | |
N | 14 | mm | |
s1 | 24.3 | mm | |
T | 45.3 | mm | |
Values for B1 and s1 before the grub screw is tightened (sleeve and inner ring bore at starting position). |
|||
Dowel pins | |||
J6 | 106 | mm | |
J7 | 29 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed | 1100 | r/min |
Mass bearing unit | 1.3 | kg |
Thread grub screw | G2 | M6 | ||
Hexagonal key size for grub screw | N | 3 | mm | |
Recommended tightening torque for grub screw | 7.4 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
Appropriate SKF mounting kit | 626830 |
Housing |
FY 507 M/VZ033
|
|||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
120x180x15 HMSA10 V | 120 | 180 | 15 | Seals |
---|---|---|---|---|
232/530 CAK/W33 | 530 | 980 | 355 | Bearings, units and housings |
38x74x11 CRWA1 R | 38 | 74 | 11 | Seals |
5399 | 14 | 28.55 | 5.16 | Seals |
81180 M | 400 | 480 | 65 | Bearings, units and housings |
C 39/630 KM | 630 | 850 | 165 | Bearings, units and housings |
KMTA 34 | 32 | - | 170 | Bearings, units and housings |
KRE 47 PPA | - | 47 | 24 | Bearings, units and housings |
NX 10 Z | 10 | 19 | 18 | Bearings, units and housings |
OH 3088 H | 410 | 440 | 228 | Bearings, units and housings |
SAF 22626 | 112.7125 | - | - | Bearings, units and housings |
SSAFS 22536 T | 163.5125 | - | - | Bearings, units and housings |
Hot number:
18x28x7 HMS5 RG
65x80x8 CRW1 R
811/1120 M
85874
89417 M
C 2314 K
NU 408
NUTR 1542 X
OKC 610
PPMF 161817
S71920 ACB/HCP4A
SNW 10x1.5/8
SY 25 LDW
SYR 2 3/16-18
W 607-2Z
Previous:FY 1.7/16 FM Bearings, units and housings ---- Next:FY 1.7/16 TDW Bearings, units and housings
Return to SKF bearing