Housing material | Cast iron |
d | 25.4 | mm | |
A | 30 | mm | |
A1 | 12 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 20.5 | mm | |
B1 | 31 | mm | |
Da | H11 | 74.6 | mm |
Db1 | 65 | mm | |
Db2 | 71 | mm | |
J | 70 | mm | |
L | 95 | mm | |
N | 11.5 | mm | |
s1 | 23.5 | mm | |
T | 42.5 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 21 | mm | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 83 | mm | |
J7 | 19 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 14 | kN | |
Basic static load rating | C0 | 7.8 | kN | |
Fatigue load limit | Pu | 0.335 | kN | |
Limiting speed | 7000 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 0.71 | kg |
Thread grub screw | G2 | 1/4-28 UNF | ||
Hexagonal key size for grub screw | N | 3.175 | mm | |
Recommended tightening torque for grub screw | 4 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 10 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.375 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
110x160x12 CRWH1 R | 110 | 160 | 12 | Seals |
---|---|---|---|---|
21245 | 53.975 | 79.38 | 11.13 | Seals |
35040 | 88.9 | 120.68 | 9.53 | Seals |
6016 N | 80 | 125 | 22 | Bearings, units and housings |
7008 ACD/HCP4A | 40 | 68 | 15 | Bearings, units and housings |
811/850 M | 850 | 1000 | 120 | Bearings, units and housings |
BD-C 2238 K-H 3138 | 170 | 340 | 92 | Bearings, units and housings |
K 18x22x17 | 18 | 22 | 17 | Bearings, units and housings |
OKCX 820 | 820 | - | ||
SNL 30/530 TURA | 500 | - | - | Bearings, units and housings |
SSAFS 23044 KATLC x 7.7/8 | 200.025 | - | - | Bearings, units and housings |
TU 20 FM | 20 | - | - | Bearings, units and housings |
Hot number:
14804
150x180x12 HMSA10 V
46975
42x62x10 HMS5 V
6206-2Z/VA208
9285/9220
BTM 95 ATN9/HCP4CDB
FYAWK 506 L
H 210
NNCF 5009 CV
NU 312 ECPH
PPM 252820
S7014 CE/HCP4A
SAF 23026 KAT x 4.1/2
SYJ 508
Previous:FSYE 4-3 Bearings, units and housings ---- Next:FY 1. LDW Bearings, units and housings
Return to SKF bearing