| Housing material | Cast iron | |||


| d | 25.4 | mm | |
| A | 30 | mm | |
| A1 | 12 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 18 | mm | |
| B | 34.1 | mm | |
| Da | H11 | 74.6 | mm |
| Db1 | 65 | mm | |
| Db2 | 71 | mm | |
| J | 70 | mm | |
| L | 95 | mm | |
| N | 11.5 | mm | |
| s1 | 19.8 | mm | |
| T | 38.8 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 21 | mm | |
| Dowel pins | |||
| J6 | 83 | mm | |
| J7 | 19 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 14 | kN | |
| Basic static load rating | C0 | 7.8 | kN | |
| Fatigue load limit | Pu | 0.335 | kN | |
| Limiting speed | 1500 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.7 | kg |
| Thread grub screw | G2 | 1/4-28 UNF | ||
| Hexagonal key size for grub screw | N | 3.175 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in | |
| Housing |
FY 505 M/VZ033
|
|||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 22610 | 57.15 | 90.55 | 11.13 | Seals |
|---|---|---|---|---|
| 25x62x10 HMS5 RG | 25 | 62 | 10 | Seals |
| 61868 | 340 | 420 | 38 | Bearings, units and housings |
| 62301-2RS1 | 12 | 37 | 17 | Bearings, units and housings |
| 8649 | 22.225 | 33.22 | 6.35 | Seals |
| 7011 CE/HCP4A | 55 | 90 | 18 | Bearings, units and housings |
| 7018 ACB/HCP4AL | 90 | 140 | 24 | Bearings, units and housings |
| 7052 BGM | 260 | 400 | 65 | Bearings, units and housings |
| FYTB 50 WDW | 50 | - | - | Bearings, units and housings |
| K 23x35x16 TN | 23 | 35 | 16 | Bearings, units and housings |
| S71910 ACD/P4A | 50 | 72 | 12 | Bearings, units and housings |
| SAF 1609-210 | 36.5125 | - | - | Bearings, units and housings |
Hot number:
24088 ECAK30/W33
3202 A-2RS1
35x47x6 HMS5 V
464777
75x95x10 HMSA10 RG
C 3036
MVR1-17
NJ 310 ECM
NX 10 Z
P 72 R-30 RM
PCM 707570 M
PSM 404630 A51
PWM 657580
S7009 ACD/HCP4A
W 623
Previous:FY 1. LDW Bearings, units and housings ---- Next:FY 1. TF Bearings, units and housings
Return to SKF bearing