Housing material | Cast iron |
d | 20 | mm | |
A | 29.5 | mm | |
A1 | 11 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 18.5 | mm | |
B1 | 31 | mm | |
Da | H11 | 68.3 | mm |
Db1 | 57 | mm | |
Db2 | 63 | mm | |
J | 63.5 | mm | |
L | 86 | mm | |
N | 11.5 | mm | |
s1 | 24 | mm | |
T | 43 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 20.5 | mm | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 74 | mm | |
J7 | 16 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 12.7 | kN | |
Basic static load rating | C0 | 6.55 | kN | |
Fatigue load limit | Pu | 0.28 | kN | |
Limiting speed | 8500 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 0.56 | kg |
Thread grub screw | G2 | M6x0.75 | ||
Hexagonal key size for grub screw | N | 3 | mm | |
Recommended tightening torque for grub screw | 4 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 10 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.375 | in |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
32222T122/DB | 110 | 200 | - | Bearings, units and housings |
---|---|---|---|---|
38673 | 98.425 | 123.85 | 11.13 | Seals |
594241 | 532.9936 | - | - | Seals |
63x90x10 HMSA10 RG | 63 | 90 | 10 | Seals |
7020 CB/P4A | 100 | 150 | 24 | Bearings, units and housings |
BTM 140 BM/P4CDB | 140 | 210 | 63 | Bearings, units and housings |
C 3236 K | 180 | 320 | 112 | Bearings, units and housings |
N 1011 KTN/HC5SP | 55 | 90 | 18 | Bearings, units and housings |
NU 312 ECJ | 60 | 130 | 31 | Bearings, units and housings |
RNA 4907.2RS | 42 | 55 | 20 | Bearings, units and housings |
SSAFS 23024 KA x 4.1/16 | 103.1875 | - | - | Bearings, units and housings |
W 61906-2Z | 30 | 47 | 9 | Bearings, units and housings |
Hot number:
28x38x8 HMSA10 RG
7306 BEGAP
FBSA 210 A/QFC
FSAF 1616 TLC
FSYE 2 1/2 N-118
FYR 2 3/4-18
NU 2240 ECML
OKC 065
PCM 130135100 M
PCM 606520 E
PSM 7585100 A51
S71914 CD/P4A
SYNT 80 LTF
W 636-2Z
W 63803-2RZ
Previous:FY 2.7/16 WF Bearings, units and housings ---- Next:FY 20 TDW Bearings, units and housings
Return to SKF bearing