| Housing material | Cast iron | |||


| d | 20 | mm | |
| A | 29.5 | mm | |
| A1 | 11 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 18.5 | mm | |
| B | 31 | mm | |
| Da | H11 | 68.3 | mm |
| Db1 | 57 | mm | |
| Db2 | 63 | mm | |
| J | 63.5 | mm | |
| L | 86 | mm | |
| N | 11.5 | mm | |
| s1 | 18.3 | mm | |
| T | 37.3 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 20.5 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 74 | mm | |
| J7 | 16 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 12.7 | kN | |
| Basic static load rating | C0 | 6.55 | kN | |
| Fatigue load limit | Pu | 0.28 | kN | |
| Limiting speed | 5000 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.52 | kg |
| Thread grub screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in | |
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| BD-23022 CCK/W33-AHX 322 | 105 | 170 | 45 | Bearings, units and housings |
|---|---|---|---|---|
| 31758 | 80.9752 | 107.92 | 11.13 | Seals |
| 35x62x7 HMS5 V | 35 | 62 | 7 | Seals |
| 51120 | 100 | 135 | 25 | Bearings, units and housings |
| 4991 | 12.7 | 25.37 | 6.35 | Seals |
| FNL 507 B | 30 | - | - | Bearings, units and housings |
| MB 10 A | 50 | 74 | - | Bearings, units and housings |
| NJ 1896 MA | 480 | 600 | 56 | Bearings, units and housings |
| OKC 900 | 900 | - | ||
| OKCS 250 | 250 | - | ||
| P 85 R-1.1/2 TF | 38.1 | - | - | Bearings, units and housings |
| S71904 ACD/P4A | 20 | 37 | 9 | Bearings, units and housings |
Hot number:
1125230
17444
23742
55x78x9 HMS1 R
6310-Z
7016 CD/HCP4A
87247
99062
99351
AN 34
HM 31/850
NA 2210.2RSX
NJ 222 ECP
SAF 22617 x 2.13/16 T
W 61907 R-2Z
Previous:FY 20 TF/VA228 Bearings, units and housings ---- Next:FY 20 WDW Bearings, units and housings
Return to SKF bearing