| Housing material | Cast iron | |||


| d | 25 | mm | |
| A | 30 | mm | |
| A1 | 12 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 18 | mm | |
| B1 | 31 | mm | |
| Da | H11 | 74.6 | mm |
| Db1 | 65 | mm | |
| Db2 | 71 | mm | |
| J | 70 | mm | |
| L | 95 | mm | |
| N | 11.5 | mm | |
| s1 | 23.5 | mm | |
| T | 42.5 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 21 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 83 | mm | |
| J7 | 19 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 14 | kN | |
| Basic static load rating | C0 | 7.8 | kN | |
| Fatigue load limit | Pu | 0.335 | kN | |
| Limiting speed | 7000 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.7 | kg |
| Thread grub screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in | |
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 17558 | 44.45 | 69.85 | 7.95 | Seals |
|---|---|---|---|---|
| 25x38x7 HMSA10 V | 25 | 38 | 7 | Seals |
| 400084 | 7 | - | - | Seals |
| 45x60x8 HMSA10 RG | 45 | 60 | 8 | Seals |
| 7022 CE/HCP4AH1 | 110 | 170 | 28 | Bearings, units and housings |
| D/W R3-2RS1 | 4.762 | 12.7 | 4.978 | Bearings, units and housings |
| K 23x35x16 TN | 23 | 35 | 16 | Bearings, units and housings |
| NCF 2332 ECJB/PEX | 160 | 340 | 114 | Bearings, units and housings |
| NCF 3030 CV | 150 | 225 | 56 | Bearings, units and housings |
| SAF 23044 KAT x 8 | 201.6125 | - | - | Bearings, units and housings |
| W 61800-2RS1 | 10 | 19 | 5 | Bearings, units and housings |
| WBB1-8700-2Z | 1.2 | 4 | 2.5 | Bearings, units and housings |
Hot number:
18880
405500
619/7
6210-2Z
62495
6306-RZ
71911 CB/HCP4AL
FYJ 20 TF
K 81118 TN
NU 314 ECML
OKCX 600
PCZ 4432 E
SAFS 22522
SY 35 TDW
SYNT 40 LTF
Previous:FY 20 WDW Bearings, units and housings ---- Next:FY 25 LDW Bearings, units and housings
Return to SKF bearing