Housing material | Cast iron |
d | 25 | mm | |
A | 30 | mm | |
A1 | 12 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 18 | mm | |
B1 | 44.4 | mm | |
Da | H11 | 74.6 | mm |
Db1 | 65 | mm | |
Db2 | 71 | mm | |
J | 70 | mm | |
L | 95 | mm | |
N | 11.5 | mm | |
s1 | 26.9 | mm | |
T | 45.9 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 21 | mm | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 83 | mm | |
J7 | 19 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 14 | kN | |
Basic static load rating | C0 | 7.8 | kN | |
Fatigue load limit | Pu | 0.335 | kN | |
Limiting speed | 7000 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 0.76 | kg |
Thread grub screw | G2 | M6x0.75 | ||
Hexagonal key size for grub screw | N | 3 | mm | |
Recommended tightening torque for grub screw | 4 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 10 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.375 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
23122 CC/W33 | 110 | 180 | 56 | Bearings, units and housings |
---|---|---|---|---|
280x340x25 HDS1 R | 280 | 340 | 25 | Seals |
470481 | 468 | - | - | Seals |
52211 | 45 | 90 | 45 | Bearings, units and housings |
FYTWK 20 YTH | 20 | - | - | Bearings, units and housings |
G 42x52x4 | 42 | 52 | 4 | Seals |
GE 300 ESX-2LS | 300 | 430 | 120 | Bearings, units and housings |
N 308 ECM | 40 | 90 | 23 | Bearings, units and housings |
OKC 160 | 160 | - | ||
SY 1.1/4 FM | 31.75 | - | - | Bearings, units and housings |
SYR 1 1/2-18 | 38.1 | - | - | Bearings, units and housings |
W 61906-2RZ | 30 | 47 | 9 | Bearings, units and housings |
Hot number:
35x54x7 CRW1 R
316200
TQO design
6200/HC5C3
65 VA R
7032 CD/P4AL
7319 BECBY
99725
K 89428 M
KMK 12
NJG 2309 VH
RN-3.5x11.8 BF/G2
SAF 22632 x 5.3/8
SYK 40 TF
WBB1-8704 R
Previous:FY 25 WDW Bearings, units and housings ---- Next:FY 3. UTF Bearings, units and housings
Return to SKF bearing