Housing material | Cast iron |
d | 30 | mm | |
A | 32.5 | mm | |
A1 | 13 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 20 | mm | |
B | 38.1 | mm | |
Da | H11 | 93.7 | mm |
Db1 | 76 | mm | |
Db2 | 84 | mm | |
J | 82.5 | mm | |
L | 108 | mm | |
N | 11.5 | mm | |
s1 | 22.2 | mm | |
T | 42.2 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 21 | mm | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 96 | mm | |
J7 | 24.5 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 19.5 | kN | |
Basic static load rating | C0 | 11.2 | kN | |
Fatigue load limit | Pu | 0.475 | kN | |
Limiting speed | 6300 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 1 | kg |
Thread grub screw | G2 | M6x0.75 | ||
Hexagonal key size for grub screw | N | 3 | mm | |
Recommended tightening torque for grub screw | 4 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 10 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.375 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
BD-22214 EK-H 314 | 60 | 125 | 31 | Bearings, units and housings |
---|---|---|---|---|
23134 CCK/W33 | 170 | 280 | 88 | Bearings, units and housings |
38x52x7 HMS5 RG | 38 | 52 | 7 | Seals |
470451 | 439 | - | - | Seals |
6204-2Z/VA228 | 20 | 47 | 14 | Bearings, units and housings |
C 2214 V | 70 | 125 | 31 | Bearings, units and housings |
NU 1011 ECML/C3VL0241 | 55 | 90 | 18 | Bearings, units and housings |
OKBS 56 | 56 | - | - | |
PCZ 4860 E | 76.2 | 80.9625 | 95.25 | Bearings, units and housings |
RNA 4838 | 210 | 240 | 50 | Bearings, units and housings |
SY 17 TF | 17 | - | - | Bearings, units and housings |
WBB1-8708-2Z | 8 | 14 | 4 | Bearings, units and housings |
Hot number:
3202 A-2ZTN9/MT33
401205
6021-Z
63004-2RS1
7020 ACD/HCP4AL
C 3030 V
FYTB 1.1/2 RM
IR 35x40x17
NJ 2312 ECN1ML
NU 20/530 ECMA
P 40
PRMF 606560
PCZ 4848 E
SAF 22517 x 2.7/8 TLC
SYNT 60 LTF
Previous:FY 30 TDW Bearings, units and housings ---- Next:FY 30 TF/VA201 Bearings, units and housings
Return to SKF bearing