| Housing material | Cast iron | |||


| d | 35 | mm | |
| A | 34.5 | mm | |
| A1 | 13 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 22 | mm | |
| B1 | 38.9 | mm | |
| Da | H11 | 106.4 | mm |
| Db1 | 87 | mm | |
| Db2 | 95 | mm | |
| J | 92 | mm | |
| L | 118 | mm | |
| N | 14 | mm | |
| s1 | 29.4 | mm | |
| T | 50.4 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 22.5 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 106 | mm | |
| J7 | 29 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 25.5 | kN | |
| Basic static load rating | C0 | 15.3 | kN | |
| Fatigue load limit | Pu | 0.655 | kN | |
| Limiting speed | 5300 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 1.3 | kg |
| Thread grub screw | G2 | M10x1 | ||
| Hexagonal key size for grub screw | N | 5 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 12 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 115x140x12 HMS5 RG | 115 | 140 | 12 | Seals |
|---|---|---|---|---|
| 13691 | 34.925 | 57.15 | 7.95 | Seals |
| 17x30x7 HMS5 RG | 17 | 30 | 7 | Seals |
| 597356 | 762 | - | - | Seals |
| 6214 NR | 70 | 125 | 24 | Bearings, units and housings |
| 82560 | 209.55 | 260.35 | 15.88 | Seals |
| FSNL 532 TURU | 140 | - | - | Bearings, units and housings |
| HME 31/670 | 106 | - | 670 | Bearings, units and housings |
| OKF 130 | 130 | 305 | - | |
| PF 30 RM | 30 | - | - | Bearings, units and housings |
| S7011 CD/P4A | 55 | 90 | 18 | Bearings, units and housings |
| SYFWK 1.7/16 LTA | 36.512 | - | - | Bearings, units and housings |
Hot number:
13845
22446
623-2Z
6391/K-6320
7016 ACE/P4A
7034 ACD/P4A
91337
NATR 6
RNU 204
SAF 1622 x 3.7/8
SAF 22624 x 4.1/8
SAFS 23038 KA x 6.13/16
SAW 23524 x 4 T
SSAFS 22536
SY 30 TR
Previous:FY 30 WF Bearings, units and housings ---- Next:FY 35 LDW Bearings, units and housings
Return to SKF bearing