| Housing material | Cast iron | |||


| d | 40 | mm | |
| A | 38.5 | mm | |
| A1 | 14 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 23.5 | mm | |
| B1 | 43.7 | mm | |
| Da | H11 | 115.9 | mm |
| Db1 | 98 | mm | |
| Db2 | 106 | mm | |
| J | 101.5 | mm | |
| L | 130 | mm | |
| N | 14 | mm | |
| s1 | 33.2 | mm | |
| T | 57.2 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 25.5 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 118 | mm | |
| J7 | 34 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed | 4800 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 1.8 | kg |
| Thread grub screw | G2 | M10x1 | ||
| Hexagonal key size for grub screw | N | 5 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 12 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 11060 | 28.575 | 38.07 | 4.78 | Seals |
|---|---|---|---|---|
| 294/630 EM | 630 | 1090 | 280 | Bearings, units and housings |
| 30215T70/DB | 75 | 130 | - | Bearings, units and housings |
| 401704 | 153 | - | - | Seals |
| 6324-Z | 120 | 260 | 55 | Bearings, units and housings |
| 7222 BECCM | 110 | 200 | 38 | Bearings, units and housings |
| 80x95x10 HMS5 V | 80 | 95 | 10 | Seals |
| 891/530 M | 530 | 640 | 67 | Bearings, units and housings |
| 900 VA R | 825 | - | - | Seals |
| AH 2308 | 35 | 40 | 40 | Bearings, units and housings |
| NU 214 ECM | 70 | 125 | 24 | Bearings, units and housings |
| OH 30/710 HE | 670 | 830 | 342 | Bearings, units and housings |
Hot number:
1419300
27565
3315 A-2Z
415502
48060
71917 CE/HCP4AH1
89418 M
99272
SA 60 TXE-2LS
SAW 23538 T
SHR 42
SNL 30/500 TURT
SSAFS 22530 x 5.1/4 T
SYF 45 FM
YAT 208
Previous:FY 35 WF Bearings, units and housings ---- Next:FY 40 LDW Bearings, units and housings
Return to SKF bearing