|
||||
Housing material | Cast iron |
d | 25 | mm | |
A | 31 | mm | |
A1 | 13 | mm | |
A3 | H14 | 3.2 | mm |
B1 | 38 | mm | |
Da | H11 | 93.7 | mm |
Db1 | 76 | mm | |
Db2 | 85 | mm | |
J | 83 | mm | |
L | 108 | mm | |
N | 12 | mm | |
s1 | ≈ | 22.5 | mm |
T | 40.5 | mm | |
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 19.5 | mm | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 96 | mm | |
J7 | 24.5 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 19.5 | kN | |
Basic static load rating | C0 | 11.2 | kN | |
Fatigue load limit | Pu | 0.475 | kN | |
Limiting speed | 6300 | r/min |
Mass bearing unit | 1.05 | kg |
Appropriate spanner | HN 5-6 | |||
Recommended lock nut tightening angle | a | 95 | ° | |
Recommended diameter for attachment bolts, mm | G | 10 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.375 | in |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
BD-22244 CCK/W33-AOH 2244 | 200 | 400 | 108 | Bearings, units and housings |
---|---|---|---|---|
22348 CCK/W33 | 240 | 500 | 155 | Bearings, units and housings |
25x35x7 CRW1 V | 25 | 35 | 7 | Seals |
36x54x8 CRW1 R | 36 | 54 | 8 | Seals |
52651 | 133.35 | 171.45 | 12.7 | Seals |
6230 M | 150 | 270 | 45 | Bearings, units and housings |
D/W R1 R | 1.397 | 4.762 | 1.984 | Bearings, units and housings |
L 183449/410 | 762 | 889 | 88.9 | Bearings, units and housings |
OH 39/1060 H | 1000 | 1200 | 372 | Bearings, units and housings |
PFD 30 TR | 30 | - | - | Bearings, units and housings |
SY 45 TF/VA228 | 45 | - | - | Bearings, units and housings |
ZW 90x110 | 90 | 110 | 2 | Seals |
Hot number:
19466
209-2Z
33205
6232
71914 CE/HCP4A
71915 ACE/P4AL
87789
99167
FNL 515 B
GE 180 ES
MVR2-60
NA 4903.2RS
OKBS 71
SNL 3038 G
W 638/4 X-2RS1
Previous:FYJ 3/4 TF Bearings, units and housings ---- Next:FYJ 30 TF Bearings, units and housings
Return to SKF bearing