|
||||
Housing material | Cast iron |
d | 30 | mm | |
A | 34 | mm | |
A1 | 13 | mm | |
A3 | H14 | 3.2 | mm |
B1 | 43 | mm | |
Da | H11 | 106.4 | mm |
Db1 | 87 | mm | |
Db2 | 96 | mm | |
J | 92 | mm | |
L | 118 | mm | |
N | 14 | mm | |
s1 | ≈ | 24.8 | mm |
T | 43.8 | mm | |
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 20.5 | mm | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 106 | mm | |
J7 | 29 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed | 5300 | r/min |
Mass bearing unit | 1.35 | kg |
Appropriate spanner | HN 7 | |||
Recommended lock nut tightening angle | a | 100 | ° | |
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1400240 | 355.6 | 393.7 | 17.48 | Seals |
---|---|---|---|---|
22216 EK | 80 | 140 | 33 | Bearings, units and housings |
22x42x10 HMS5 RG | 22 | 42 | 10 | Seals |
314-2ZNR | 70 | 150 | 35 | Bearings, units and housings |
32960 | 300 | 420 | 76 | Bearings, units and housings |
409403 | 900 | - | - | Seals |
526340 | 1714.5 | - | - | Seals |
6300/HR11QN | 10 | 35 | 11 | Bearings, units and housings |
7313 BEGAP | 65 | 140 | 33 | Bearings, units and housings |
BT4-8052/HA1 | 482.6 | 647.7 | - | Bearings, units and housings |
SY 3/4 FM | 19.05 | - | - | Bearings, units and housings |
SYNT 70 FTF | 70 | - | - | Bearings, units and housings |
Hot number:
2470
40x68x8 HMSA10 V
6206-2RZ
6232
6313-RS1
71916 ACB/HCP4A
71948 ACD/P4A
AHX 3122
BD-C 41/560 K30MB-AOH 241/560 G
H 2324
HK 2530.2RS
K 20x26x13
NKI 55/25 TN
SAF 22312 T
SIL 80 ESX-2LS
Previous:FYJ 30 TF Bearings, units and housings ---- Next:FYJ 35 TF Bearings, units and housings
Return to SKF bearing