|
||||
| Housing material | Cast iron | |||


| d | 35 | mm | |
| A | 36 | mm | |
| A1 | 14 | mm | |
| A3 | H14 | 3.2 | mm |
| B1 | 46 | mm | |
| Da | H11 | 115.9 | mm |
| Db1 | 99 | mm | |
| Db2 | 107 | mm | |
| J | 102 | mm | |
| L | 130 | mm | |
| N | 16 | mm | |
| s1 | ≈ | 27.5 | mm |
| T | 48.5 | mm | |
|
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 23 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 118 | mm | |
| J7 | 34 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed | 4800 | r/min |
| Mass bearing unit | 1.85 | kg |
| Appropriate spanner | HN 8-9 | |||
| Recommended lock nut tightening angle | a | 105 | ° | |
| Recommended diameter for attachment bolts, mm | G | 14 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5625 | in | |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 50x72x12 HMSA10 RG | 50 | 72 | 12 | Seals |
|---|---|---|---|---|
| 524365 | 603.25 | - | - | Seals |
| 6204 NR | 20 | 47 | 14 | Bearings, units and housings |
| 6209/VA201 | 45 | 85 | 19 | Bearings, units and housings |
| 6412 | 60 | 150 | 35 | Bearings, units and housings |
| 95x145x12 HMS5 RG | 95 | 145 | 12 | Seals |
| BTM 170 AM/HCP4CDB | 170 | 260 | 81 | Bearings, units and housings |
| C 3152 | 260 | 440 | 144 | Bearings, units and housings |
| C 3984 KM | 420 | 560 | 106 | Bearings, units and housings |
| NJ 2212 ECP | 60 | 110 | 28 | Bearings, units and housings |
| SHT 140 | 140 | - | - | Coupling systems |
| SD 12x18x3 | 12 | 18 | 3 | Seals |
Hot number:
20x35x7 CRW1 V
BD-22309 EK-H 2309
408003
50148
61905-2RS1
7007 ACE/HCP4AL1
86567
8x22x7 HMS5 RG
99501
GAC 35 F
OKBS 58
SAF 1518
W 6008-2RZ
SYFWK 506 L
W 618/1
Previous:FYJ 35 TF Bearings, units and housings ---- Next:FYJ 40 TF Bearings, units and housings
Return to SKF bearing