| Housing material | Composite | |||


| d | 40 | mm | |
| A | 39 | mm | |
| A1 | 17 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 23.5 | mm | |
| B1 | 42.9 | mm | |
| Da | H11 | 115.9 | mm |
| Db | 98 | mm | |
| J | 101.5 | mm | |
| L | 130 | mm | |
| N | 14.8 | mm | |
| s1 | 25.9 | mm | |
| T | 49.9 | mm |
Values for B1 and s1 before the grub screw is tightened (sleeve and inner ring bore at starting position).
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed | 950 | r/min |
| Mass bearing unit | 0.88 | kg |
| Thread grub screw | G2 | M6 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 7.4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 12 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
| Appropriate SKF mounting kit | 626830 | |||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 120x180x15 HMS5 RG | 120 | 180 | 15 | Seals |
|---|---|---|---|---|
| 35x45x7 HMSA10 V | 35 | 45 | 7 | Seals |
| 48x72x8 HMS5 V | 48 | 72 | 8 | Seals |
| 7018 ACE/HCP4A | 90 | 140 | 24 | Bearings, units and housings |
| 9903 | 25.4 | 40 | 6.35 | Seals |
| AH 24130 | 145 | 150 | 115 | Bearings, units and housings |
| TQO design | 710 | 900 | - | Bearings, units and housings |
| FYK 25 TR | 25 | - | - | Bearings, units and housings |
| H 306 | 25 | 45 | 31 | Bearings, units and housings |
| MB 18 A | 90 | 126 | - | Bearings, units and housings |
| OH 3260 H | 280 | 380 | 240 | Bearings, units and housings |
| W 61805 R-2Z | 25 | 37 | 7 | Bearings, units and housings |
Hot number:
16500
207-Z
249/1000 CA/W33
400105
406903
614885
91333
G 37x47x4
MB 14
NNCL 4916 CV
NNCL 4956 CV
NU 1026 M/C3VL2071
SAF 22610 T
YAR 207-107-2RFGR/HV
YAR 210-2FW/VA228
Previous:FYK 35 WR/VL065 Bearings, units and housings ---- Next:FYK 40 TD Bearings, units and housings
Return to SKF bearing