Housing material | Cast iron |
d | 31.75 | mm | |
A | 34.5 | mm | |
A1 | 13 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 24.5 | mm | |
B1 | 38.9 | mm | |
B4 | 6.75 | mm | |
Da | H11 | 88.9 | mm |
Db1 | 88 | mm | |
Db2 | 96 | mm | |
J | 130 | mm | |
H | 156 | mm | |
L | 96 | mm | |
N | 14 | mm | |
s1 | 29.4 | mm | |
T | 50.4 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 22 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 106 | mm | |
J7 | 15 | mm | |
N4 | 2 | mm |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed | 5300 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 1.25 | kg |
Thread grub screw | G2 | 3/8-24 UNF | ||
Hexagonal key size for grub screw | N | 4.763 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1700 VE R | 1596 | - | - | Seals |
---|---|---|---|---|
212-ZNR | 60 | 110 | 22 | Bearings, units and housings |
240x270x15 HMSA10 V | 240 | 270 | 15 | Seals |
32x72x7 HMS5 V | 32 | 72 | 7 | Seals |
3300342 | 838.2 | 879.6 | 19.05 | Seals |
39851 | 101.6 | 123.85 | 11.13 | Seals |
41761 | 106.3752 | 133.38 | 11.91 | Seals |
53415 M + U 415 | 75 | 160 | 69 | Bearings, units and housings |
6305-RZ | 25 | 62 | 17 | Bearings, units and housings |
SSAFS 23048 KATLC x 8.15/16 | 227.0125 | - | - | Bearings, units and housings |
W 6009-2RZ | 45 | 75 | 16 | Bearings, units and housings |
W 605-2RS1 | 5 | 14 | 5 | Bearings, units and housings |
Hot number:
15518
22206 E
32020 X
403754
6001-2RSL
635-2RS1
700 VRME R
7004 ACD/HCP4A
81264 M
BT2B 332501/HA5
FSAF 22613 x 2.1/8 T
K 81138 M
KMFE 6
L 555249/210
PCZ 1416 E
Previous:FYTB 1.1/2 WDW Bearings, units and housings ---- Next:FYTB 1.1/4 LDW Bearings, units and housings
Return to SKF bearing