Housing material | Cast iron |
d | 31.75 | mm | |
A | 34.5 | mm | |
A1 | 13 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 24.5 | mm | |
B | 33 | mm | |
B4 | 6 | mm | |
Da | H11 | 88.9 | mm |
Db1 | 88 | mm | |
Db2 | 96 | mm | |
J | 130 | mm | |
H | 156 | mm | |
L | 96 | mm | |
N | 14 | mm | |
s1 | 23.3 | mm | |
T | 44.3 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 22 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 106 | mm | |
J7 | 15 | mm | |
N4 | 2 | mm |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed | 5300 | r/min |
(with shaft tolerance h6)
Thread grub screw | G2 | 5/16-24 UNF | ||
Hexagonal key size for grub screw | N | 3.969 | mm | |
Recommended tightening torque for grub screw | 6.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
34985 | 88.9 | 117.5 | 11.13 | Seals |
---|---|---|---|---|
38x52x8 HMSA10 V | 38 | 52 | 8 | Seals |
471426 | 1350 | - | - | Seals |
6203-2RSL | 17 | 40 | 12 | Bearings, units and housings |
6757 | 17.399 | 29.9974 | 7.0104 | Seals |
7003 CD/P4A | 17 | 35 | 10 | Bearings, units and housings |
89424 M | 120 | 250 | 78 | Bearings, units and housings |
FYTB 504 M | - | - | - | Bearings, units and housings |
NU 2264 ECMA | 320 | 580 | 150 | Bearings, units and housings |
SAF 1308-210 | 40 | - | - | Bearings, units and housings |
SAF 1511 x 1.7/8 | 47.625 | - | - | Bearings, units and housings |
SY 2.15/16 TF/VA228 | 74.613 | - | - | Bearings, units and housings |
Hot number:
11801
17234
22328 CCK/W33
239/560 CAK/W33
31313
375 VRME R
390x450x25 HDS1 R
49928
6312-Z
65x85x12 HMS5 RG
7218 BEGAF
GE 160 TXA-2LS
K 55x60x20
NK 26/20
NUKR 90 XA
Previous:FYTB 1.1/4 LDW Bearings, units and housings ---- Next:FYTB 1.1/4 TDW Bearings, units and housings
Return to SKF bearing