Housing material | Cast iron |
d | 28.575 | mm | |
A | 32.5 | mm | |
A1 | 13 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 22.5 | mm | |
B1 | 35.7 | mm | |
B4 | 5.95 | mm | |
Da | H11 | 76.2 | mm |
Db1 | 77 | mm | |
Db2 | 83 | mm | |
J | 116.5 | mm | |
H | 141.5 | mm | |
L | 83 | mm | |
N | 11.5 | mm | |
s1 | 26.7 | mm | |
T | 46.7 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 21 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 98.5 | mm | |
J7 | 12.5 | mm | |
N4 | 2 | mm |
Basic dynamic load rating | C | 19.5 | kN | |
Basic static load rating | C0 | 11.2 | kN | |
Fatigue load limit | Pu | 0.475 | kN | |
Limiting speed | 6300 | r/min |
(with shaft tolerance h6)
Thread grub screw | G2 | 5/16-24 UNF | ||
Hexagonal key size for grub screw | N | 3.969 | mm | |
Recommended tightening torque for grub screw | 6.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 10 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.375 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
10x25x7 HMSA10 V | 10 | 25 | 7 | Seals |
---|---|---|---|---|
18412 | 46.8376 | 63.55 | 9.53 | Seals |
22326-2CS5K/VT143 | 130 | 280 | 93 | Bearings, units and housings |
40x55x8 CRW1 R | 40 | 55 | 8 | Seals |
6222-Z | 110 | 200 | 38 | Bearings, units and housings |
MS 31/600-560 | - | - | 45 | Bearings, units and housings |
NJ 310 ECJ | 50 | 110 | 27 | Bearings, units and housings |
P 47 R-12 TF | 12 | - | - | Bearings, units and housings |
PBMF 121810 M1 | 12 | 18 | 10 | Bearings, units and housings |
RN-4x25.8 BF/G2 | - | - | 4 | Bearings, units and housings |
SAF 1518 x 3.1/16 | 77.7875 | - | - | Bearings, units and housings |
SYNT 80 L | 80 | - | - | Bearings, units and housings |
Hot number:
1075112
12 VS R
26208
30 VS R
6009-2Z
6581 X/6535
70x100x10 HMSA10 RG
D/W R6-2Z
KMTA 14
NNCL 4830 CV
NU 215 ECML
PCM 210215100 M
RNU 305
SAF 22613
SI 20 C
Previous:FYTB 1.1/4 WDW Bearings, units and housings ---- Next:FYTB 1.1/8 TF Bearings, units and housings
Return to SKF bearing