Housing material | Cast iron |
d | 23.813 | mm | |
A | 30 | mm | |
A1 | 12 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 20.5 | mm | |
B | 27.2 | mm | |
B4 | 5 | mm | |
Da | H11 | 63.5 | mm |
Db1 | 65 | mm | |
Db2 | 70 | mm | |
J | 99 | mm | |
H | 124 | mm | |
L | 70 | mm | |
N | 11.5 | mm | |
s1 | 19.5 | mm | |
T | 38.5 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 20.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 81 | mm | |
J7 | 12 | mm | |
N4 | 2 | mm |
Basic dynamic load rating | C | 14 | kN | |
Basic static load rating | C0 | 7.8 | kN | |
Fatigue load limit | Pu | 0.335 | kN | |
Limiting speed | 7000 | r/min |
(with shaft tolerance h6)
Thread grub screw | G2 | 1/4-28 UNF | ||
Hexagonal key size for grub screw | N | 3.175 | mm | |
Recommended tightening torque for grub screw | 4 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 10 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.375 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
150 VL V | 135 | - | - | Seals |
---|---|---|---|---|
18922 | 47.625 | 82.52 | 12.29 | Seals |
2200252 | 558.8 | 596.9 | 19.05 | Seals |
32024 X/DF | 120 | 180 | - | Bearings, units and housings |
413003 | 1240 | - | - | Seals |
417002 | 1540 | - | - | Seals |
47896/47820 | 95.25 | 146.05 | 33.338 | Bearings, units and housings |
8x22x7 HMS5 V | 8 | 22 | 7 | Seals |
GEH 80 ESX-2LS | 80 | 130 | 50 | Bearings, units and housings |
NJ 224 ECM | 120 | 215 | 40 | Bearings, units and housings |
OKF 400 | 400 | 855 | - | |
SSAFS 23034 KAT x 5.7/8 | 149.225 | - | - | Bearings, units and housings |
Hot number:
1150580
238/630 CAMA/W20
30228T106/DB
400185
60x105x8 CRW1 R
71908 CB/HCP4AL
92570
AH 3034
HK 3224
NKIS 60
PSMF 162225 A51
SAF 23038 KATLC x 7
SAFS 22528 T
SIJ 12 E
SSAFS 22524 x 4.1/8 T
Previous:FYTB 15/16 FM Bearings, units and housings ---- Next:FYTB 15/16 TF Bearings, units and housings
Return to SKF bearing