| Housing material | Composite | |||


| d | 30 | mm | |
| d2 | 48 | mm | |
| A | 33 | mm | |
| A1 | 15 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 20 | mm | |
| B1 | 37 | mm | |
| Da | H11 | 76.2 | mm |
| Db | 78 | mm | |
| J | 116.5 | mm | |
| H | 142.5 | mm | |
| L | 83 | mm | |
| N | 12.3 | mm | |
| s1 | 23 | mm | |
| T | 43 | mm |
Values for B1 and s1 before the grub screw is tightened (sleeve and inner ring bore at starting position).
| Basic dynamic load rating | C | 19.5 | kN | |
| Basic static load rating | C0 | 11.2 | kN | |
| Fatigue load limit | Pu | 0.475 | kN | |
| Limiting speed | 1200 | r/min |
| Mass bearing unit | 0.44 | kg |
| Thread grub screw | G2 | M5 | ||
| Hexagonal key size for grub screw | N | 2.5 | mm | |
| Recommended tightening torque for grub screw | 4.2 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in | |
| Appropriate SKF mounting kit | 626830 | |||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 24x42x8 HMS5 RG | 24 | 42 | 8 | Seals |
|---|---|---|---|---|
| 25x52x8 HMS5 V | 25 | 52 | 8 | Seals |
| 32217 | 85 | 150 | 38.5 | Bearings, units and housings |
| 405503 | 536 | - | - | Seals |
| 539/532 A | 53.975 | 111.125 | 38.1 | Bearings, units and housings |
| 55x90x8 HMS5 V | 55 | 90 | 8 | Seals |
| 6007-RZ | 35 | 62 | 14 | Bearings, units and housings |
| 690 VRME R | 670 | - | - | Seals |
| FYTBK 506 | - | - | - | Bearings, units and housings |
| NUP 306 ECJ | 30 | 72 | 19 | Bearings, units and housings |
| OKCX 900 | 900 | - | ||
| PFT 35 FM | 35 | - | - | Bearings, units and housings |
Hot number:
1214 ETN9
170 VL R
19940
BD-22213 EK-H 313
28x40x7 HMS5 V
55x90x8 HMSA10 RG
6301-2RSH
6303/HR22Q2
MVR1-80
NATV 5
PSM 606860 A51
RNAO 60x78x40
SAF 23032 KATLC x 5.7/16
SNW 11x1.13/16
W 619/9-2RZ
Previous:FYTBK 25 WD Bearings, units and housings ---- Next:FYTBK 30 LF Bearings, units and housings
Return to SKF bearing