|
||||
Housing material | Cast iron |
d | 25 | mm | |
A | 30.5 | mm | |
A1 | 13.5 | mm | |
A3 | H14 | 3.2 | mm |
B1 | 38 | mm | |
Da | H11 | 76.2 | mm |
Db1 | 77 | mm | |
Db2 | 80 | mm | |
J | 117 | mm | |
H | 148 | mm | |
L | 80 | mm | |
N | 16 | mm | |
s1 | ≈ | 22.5 | mm |
T | 40.5 | mm | |
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 19 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 99 | mm | |
J7 | 12.5 | mm | |
N4 | 2 | mm |
Basic dynamic load rating | C | 19.5 | kN | |
Basic static load rating | C0 | 11.2 | kN | |
Fatigue load limit | Pu | 0.475 | kN | |
Limiting speed | 6300 | r/min |
Mass bearing unit | 0.9 | kg |
Appropriate spanner | HN 5-6 | |||
Recommended lock nut tightening angle | a | 95 | ° | |
Recommended diameter for attachment bolts, mm | G | 14 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5625 | in |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
2207 E-2RS1TN9 | 35 | 72 | 23 | Bearings, units and housings |
---|---|---|---|---|
23126 CC/W33 | 130 | 210 | 64 | Bearings, units and housings |
24132-2CS5/VT143 | 160 | 270 | 109 | Bearings, units and housings |
25748 | 65.1002 | 98.45 | 11.13 | Seals |
32209/DF | 45 | 85 | - | Bearings, units and housings |
350x400x25.4 HS5 R | 350 | 400 | 25.4 | Seals |
530x580x22 HDS1 R | 530 | 580 | 22 | Seals |
99139 | 34.925 | 41.6052 | 16.002 | Seals |
BT2B 334152/HA3 | 320 | 500 | - | Bearings, units and housings |
NUP 2319 ECML | 95 | 200 | 67 | Bearings, units and housings |
SAFS 22236 | 180 | - | - | Bearings, units and housings |
YAR 203/12-2F | 12 | 40 | 27.4 | Bearings, units and housings |
Hot number:
32207
331677
6016-RS1
7201 ACD/P4A
89922
99560
BC4B 326909 A/HA3
EE 157337/157430
BT4B 334093 G/HA1VA901
FSAF 22615 TLC
NU 322 ECP
PCM 141620 M
S71919 ACE/HCP4A
SY 30 LDW
W 617/8
Previous:FYTJ 3/4 TF Bearings, units and housings ---- Next:FYTJ 30 TF Bearings, units and housings
Return to SKF bearing