|
||||
Housing material | Cast iron |
d | 30 | mm | |
A | 34 | mm | |
A1 | 16 | mm | |
A3 | H14 | 3.2 | mm |
B1 | 43 | mm | |
Da | H11 | 88.9 | mm |
Db1 | 87 | mm | |
Db2 | 96 | mm | |
J | 130 | mm | |
H | 161 | mm | |
L | 96 | mm | |
N | 16 | mm | |
s1 | ≈ | 24.8 | mm |
T | 43.8 | mm | |
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 20.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 106 | mm | |
J7 | 15 | mm | |
N4 | 2 | mm |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed | 5300 | r/min |
Mass bearing unit | 1.3 | kg |
Appropriate spanner | HN 7 | |||
Recommended lock nut tightening angle | a | 100 | ° | |
Recommended diameter for attachment bolts, mm | G | 14 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5625 | in |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
22356 CCK/W33 | 280 | 580 | 175 | Bearings, units and housings |
---|---|---|---|---|
240x270x15 HS8 R | 240 | 270 | 15 | Seals |
35x80x12 HMSA10 V | 35 | 80 | 12 | Seals |
415 VRME R | 405 | - | - | Seals |
6224 | 120 | 215 | 40 | Bearings, units and housings |
625-Z | 5 | 16 | 5 | Bearings, units and housings |
C 3176 MB | 380 | 620 | 194 | Bearings, units and housings |
FBSA 208/QFC | 40 | - | 165 | Bearings, units and housings |
NUP 219 ECML | 95 | 170 | 32 | Bearings, units and housings |
NK 42/20 | 42 | 52 | 20 | Bearings, units and housings |
SHT 85 | 85 | - | - | Coupling systems |
YAR 204-012-2RFGR/HV | 19.05 | 47 | 31 | Bearings, units and housings |
Hot number:
3490/3420
400125
402756
50x72x8 HMS5 V
618/1000 MA
7013 CE/P4A
BTM 60 ATN9/P4CDB
FSAF 1216
FYT 35 TF/VA228
FYTWK 1. YTA
NCF 3076 V
NU 1011 ECP/C3VL0241
NUH 2334 ECMH/PEX
SAF 1513
SYFWR 3/4 YZTHR
Previous:FYTJ 30 TF Bearings, units and housings ---- Next:FYTJ 35 TF Bearings, units and housings
Return to SKF bearing