|
||||
Housing material | Cast iron |
d | 45 | mm | |
A | 40 | mm | |
A1 | 18 | mm | |
A3 | H14 | 3.2 | mm |
B1 | 55 | mm | |
Da | H11 | 101.6 | mm |
Db1 | 107 | mm | |
Db2 | 115 | mm | |
J | 157 | mm | |
H | 195 | mm | |
L | 115 | mm | |
N | 19 | mm | |
s1 | ≈ | 31.1 | mm |
T | 53.1 | mm | |
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 23.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 127 | mm | |
J7 | 20 | mm | |
N4 | 2 | mm |
Basic dynamic load rating | C | 35.1 | kN | |
Basic static load rating | C0 | 23.2 | kN | |
Fatigue load limit | Pu | 0.98 | kN | |
Limiting speed | 4000 | r/min |
Mass bearing unit | 2.3 | kg |
Appropriate spanner | HN 10-11 | |||
Recommended lock nut tightening angle | a | 115 | ° | |
Recommended diameter for attachment bolts, mm | G | 16 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.625 | in |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1700 VA R | 1540 | - | - | Seals |
---|---|---|---|---|
32328 | 140 | 300 | 107.75 | Bearings, units and housings |
390x430x20 HDS2 D | 390 | 430 | 20 | Seals |
6308-2Z/VA228 | 40 | 90 | 23 | Bearings, units and housings |
89188 M | 440 | 540 | 60 | Bearings, units and housings |
FYTB 1.7/16 RM | 36.513 | - | - | Bearings, units and housings |
GE 50 ESL-2LS | 50 | 75 | 35 | Bearings, units and housings |
MVR2-15 | 15 | 32 | - | Seals |
OH 30/850 HE | 800 | 850 | 380 | Bearings, units and housings |
S7011 ACD/HCP4A | 55 | 90 | 18 | Bearings, units and housings |
SNLN 3036 | 180 | - | - | Bearings, units and housings |
SYF 50 TF | 50 | - | - | Bearings, units and housings |
Hot number:
1650255
17771
BD-21318 EK-AHX 318
316198
472001
7011 ACE/HCP4AL1
7203 CD/P4A
99831
K 9x12x10 TN
NKI 22/16
OH 31/560 H
RN-2x15.8 BF/G2
RNA 4906
SNL 3096 TURT
W 61812
Previous:FYTJ 45 TF Bearings, units and housings ---- Next:FYTJ 50 TF Bearings, units and housings
Return to SKF bearing