

| da | 510 | mm | |
| D | 810 | mm | |
| ¦¤D | 0.86 | mm | |
| A | 1265 | mm | |
| A1 | 1200 | mm | |
| A2 | 545 | mm | |
| A3 | 35 | mm | |
|
|||
| A4 | 42 | mm | |
| G | 4x | M20 | |
| G1 | BSP 1/4” and BSP 3/4” | ||
| G2 | BSP 3/4” | ||
| Maximum transmissible torque | Mt | max. | 3450 | kN·m |
| Mass coupling | 2820 | kg |
| Diameter for threaded holes for lifting at both ends | G3 | M30 x 3.5 | ||
Required free length on one shaft for installation A + 100 mm.
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 16x24x7 HMS5 RG1 | 16 | 24 | 7 | Seals |
|---|---|---|---|---|
| 21353 | 53.975 | 85.62 | 11.13 | Seals |
| 22240-2CS5/VT143 | 200 | 360 | 98 | Bearings, units and housings |
| 34336 | 87.3252 | 117.5 | 11.13 | Seals |
| 6005 N | 25 | 47 | 12 | Bearings, units and housings |
| 70x90x10 HMS5 V | 70 | 90 | 10 | Seals |
| GE 45 ES/C2 | 45 | 68 | 32 | Bearings, units and housings |
| IR 90x100x26 | 90 | 100 | 26 | Bearings, units and housings |
| NCF 2930 CV | 150 | 210 | 36 | Bearings, units and housings |
| PCM 182025 M | 18 | 20 | 25 | Bearings, units and housings |
| RIS 205 | - | - | - | Bearings, units and housings |
| SILJ 16 ES | 16 | - | 16 | Bearings, units and housings |
Hot number:
12456
17x40x7 HMSA10 V
19923
55x75x10 HMS5 RG
80.8x105.8x15.9 TP
700 VA V
7018 CB/HCP4AL
7028 ACD/P4A
99053
AOHX 30/500 G
TQO design
BT4B 328827 G/HA4VA901
HJ 1068
NU 2308 ECP
NUTR 2052 A
Previous:OKC 500 ---- Next:OKC 520
Return to SKF bearing