|
||||
| Housing material | Pressed steel | |||


| d | 20 | mm | |
| A1 | 2 | mm | |
| A2 | 8 | mm | |
| B1 | 31 | mm | |
| B4 | 4.75 | mm | |
| Da | min. | 51 | mm |
| J | 71.4 | mm | |
| H | 91 | mm | |
| L | 67 | mm | |
| N | 8.7 | mm | |
| s1 | 24 | mm | |
| T | 26 | mm |
| Basic dynamic load rating | C | 12.7 | kN | |
| Basic static load rating | C0 | 6.55 | kN | |
| Fatigue load limit | Pu | 0.28 | kN | |
| Limiting speed | 8500 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.28 | kg |
| Thread grub screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 8 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.3125 | in | |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 23124 CC/W33 | 120 | 200 | 62 | Bearings, units and housings |
|---|---|---|---|---|
| 313513 | 420 | 600 | - | Bearings, units and housings |
| 50x65x8 HMSA10 V | 50 | 65 | 8 | Seals |
| 51407 | 35 | 80 | 32 | Bearings, units and housings |
| BT4-8125 E1/C725 | 457.2 | 606 | - | Bearings, units and housings |
| D/W RW2-6 R-2Z | 3.175 | 9.525 | 4.366 | Bearings, units and housings |
| ECY 213 | - | - | - | Bearings, units and housings |
| FYTB 1.1/4 RM | 31.75 | - | - | Bearings, units and housings |
| G 22x28x4 | 22 | 28 | 4 | Seals |
| GB 3007 | - | - | 37 | Bearings, units and housings |
| NCF 28/750 V | 750 | 920 | 100 | Bearings, units and housings |
| SAF 23034 KATLC x 5.15/16 | 149.225 | - | - | Bearings, units and housings |
Hot number:
17374
18x30x7 HMSA10 RG
28x42x7 HMS5 V
5008
6210/HC5C3
89172 M
G 10x17x3
HK 3020
KMT 34
NA 4836
OKBS 53
PWM 10512080
SAF 1620 T
SY 40 TR
YAR 206-2RF/VE495
Previous:PFT 17 RM Bearings, units and housings ---- Next:PFT 20 RM Bearings, units and housings
Return to SKF bearing