

| da | 57.15 | mm | |
| Da | 140 | mm | |
| Ca | 57.785 | mm | |
| A1 | 88.9 | mm | |
| ba | 32.544 | mm | |
| H | 167.481 | mm | |
| H1 | 88.9 | mm | |
| H2 | 31.75 | mm | |
| J | min. | 244.475 | mm |
| J | max. | 279.4 | mm |
| L | 330.2 | mm | |
| N1 | 22.225 | mm | |
| Threaded holes | |||
| R1 | 53.181 | mm | |
| R2 | 21.431 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 36.513 | mm | |
| Housing |
SAF 613
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
2 x SR-1613
|
|||
| Taconite seal | TER 33 | |||
|
||||
| End plug (suffix Y) |
EPR 7
|
|||
| Max. speed for Taconite seal | 1400 | r/min |

| P60° | 83.2 | kN | |
| P90° | 49.8 | kN | |
| P120° | 30.2 | kN | |
| P150° | 26.7 | kN | |
| P180° | 31.6 | kN | |
| Pa | 6.49 | kN |
| Mass pillow block | 17.1 | kg |
| Cap bolt |
2 x 5/8-11 UNC
|
|||
| Cap bolt recommended tightening torque | 298.3 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 175.77 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 1750 VL V | 1585 | - | - | Seals |
|---|---|---|---|---|
| 26x47x7 HMS5 V | 26 | 47 | 7 | Seals |
| 411506 | 1045 | - | - | Seals |
| 6304 NR | 20 | 52 | 15 | Bearings, units and housings |
| 7012 CE/HCP4AL1 | 60 | 95 | 18 | Bearings, units and housings |
| FYJ 515 | - | - | - | Bearings, units and housings |
| HA 2317 | 74.6125 | 85 | 82 | Bearings, units and housings |
| N 1021 KTN9/HC5SP | 105 | 160 | 26 | Bearings, units and housings |
| NU 422 | 110 | 280 | 65 | Bearings, units and housings |
| S71919 CD/P4A | 95 | 130 | 18 | Bearings, units and housings |
| SAW 23536 x 6.5/16 | 160.3375 | - | - | Bearings, units and housings |
| Z 002 | 15 | - | 4 | Seals |
Hot number:
2220
32216
32240/DF
6212-ZNR
71909 ACE/HCP4A
81244 M
D/W R156 R-2ZS
FY 30 TR
N 1013 KTNHA/SP
NJ 2208 ECML
NJ 2310 ECP
PWTR 30.2RS
SAFS 23044 KA x 8
SYR 4 N
W 61810-2RZ
Previous:SAF 1613 x 2.1/4 Bearings, units and housings ---- Next:SAF 1613 x 2.1/4 TLC Bearings, units and housings
Return to SKF bearing