

| da | 63.5 | mm | |
| Da | 160 | mm | |
| Ca | 64.795 | mm | |
| A1 | 98.425 | mm | |
| ba | 35.719 | mm | |
| H | 192.088 | mm | |
| H1 | 101.6 | mm | |
| H2 | 41.275 | mm | |
| J | min. | 263.525 | mm | 
| J | max. | 295.275 | mm | 
| L | 349.25 | mm | |
| N1 | 22.225 | mm | |
| Threaded holes | |||
| R1 | 60.325 | mm | |
| R2 | 27.94 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 42.862 | mm | |
| Housing | SAF 615 | |||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring | 2 x SR-1615 | |||
| Taconite seal | TER 38 | |||
| 
 | ||||
| End plug (suffix Y) | EPR 7 | |||
| Max. speed for Taconite seal | 1250 | r/min | 

| P60° | 121 | kN | |
| P90° | 72.5 | kN | |
| P120° | 45.4 | kN | |
| P150° | 40.5 | kN | |
| P180° | 49.8 | kN | |
| Pa | 8.27 | kN | 
| Mass pillow block | 21.5 | kg | 
| Cap bolt | 2 x 5/8-11 UNC | |||
| Cap bolt recommended tightening torque | 298.3 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 286.33 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type | 
| 13810 | 34.925 | 62 | 7.95 | Seals | 
|---|---|---|---|---|
| 23226 CCK/W33 | 130 | 230 | 80 | Bearings, units and housings | 
| 49929 | 127 | 152.43 | 12.7 | Seals | 
| 6022-Z | 110 | 170 | 28 | Bearings, units and housings | 
| 7016 CB/HCP4A | 80 | 125 | 22 | Bearings, units and housings | 
| 71815 ACD/HCP4 | 75 | 95 | 10 | Bearings, units and housings | 
| AOHX 31/710 | 670 | 710 | 405 | Bearings, units and housings | 
| NJ 1026 ML | 130 | 200 | 33 | Bearings, units and housings | 
| NJ 306 ECP | 30 | 72 | 19 | Bearings, units and housings | 
| NUTR 45 A | 45 | 85 | 32 | Bearings, units and housings | 
| W 61814-2RS1 | 70 | 90 | 10 | Bearings, units and housings | 
| Z 014 F | 70 | - | 7 | Seals | 
   Hot number:
1800 VA R 
20x47x7 HMS5 RG 
27295 
330x370x16 HDS2 R 
330x370x18 HDS2 R 
6214/HC5C3 
6310-2Z/VA201 
GS 81156 
H 314 
K 95x103x40 ZW 
NAO 30x47x18 
S71912 ACD/P4A 
SNL 317 TURU 
W 61811 
W 61903-2Z 
Previous:SAF 1615 x 2.1/2 Bearings, units and housings ---- Next:SAF 1615 x 2.1/2 TLC Bearings, units and housings
Return to SKF bearing