da | 73.025 | mm | |
Da | 180 | mm | |
Ca | 69.799 | mm | |
A1 | 111.125 | mm | |
A2 | 173.037 | mm | |
ba | 38.894 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
L | 387.35 | mm | |
N1 | 25.4 | mm | |
Threaded holes | |||
R1 | 65.088 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 47.625 | mm |
Housing |
SAF 617
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1617
|
|||
Labyrinth ring |
2 x LOR 183
|
|||
|
End plug (suffix Y) |
EPR 10
|
Bearing limiting speed | 4800 | r/min |
P60° | 94.3 | kN | |
P90° | 56.5 | kN | |
P120° | 35.6 | kN | |
P150° | 32 | kN | |
P180° | 38.3 | kN | |
Pa | 10.5 | kN |
Mass pillow block | 31.4 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 365.71 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
16315 | 41.275 | 66.62 | 7.95 | Seals |
---|---|---|---|---|
19635 | 50 | 70 | 10 | Seals |
20x30x7 CRW1 R | 20 | 30 | 7 | Seals |
51238 M | 190 | 270 | 62 | Bearings, units and housings |
60620 | 153.9748 | 172 | 14 | Seals |
6209/HR22Q2 | 45 | 85 | 19 | Bearings, units and housings |
6315 | 75 | 160 | 37 | Bearings, units and housings |
6348 M | 240 | 500 | 95 | Bearings, units and housings |
NUH 2232 ECMH | 160 | 290 | 80 | Bearings, units and housings |
OKBS 137 | 137 | - | - | |
PFD 20 TR | 20 | - | - | Bearings, units and housings |
SAF 23030 KAT x 5.3/16 | 130.175 | - | - | Bearings, units and housings |
Hot number:
1200243
180 VA V
BD-22228 CCK/W33-AHX 3128
22618
24052 CCK30/W33
26921
30213
306493 AA
38880/38820
62x85x10 HMS5 RG
FY 40 LDW
H 312 E
NA 4905
SSAFS 22526
W 625-2RZ
Previous:SAF 1617 x 2.13/16 TLC Bearings, units and housings ---- Next:SAF 1617 x 2.7/8 T Bearings, units and housings
Return to SKF bearing