da | 85.725 | mm | |
Da | 215.001 | mm | |
Ca | 82.804 | mm | |
A1 | 120.65 | mm | |
ba | 45.244 | mm | |
H | 258.762 | mm | |
H1 | 133.35 | mm | |
H2 | 53.975 | mm | |
J | min. | 336.55 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 79.375 | mm | |
R2 | 30.163 | mm | |
RG | 1/2 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 55.563 | mm |
Housing |
SAF 620
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1620
|
|||
Taconite seal | TER 101 | |||
|
End plug (suffix Y) |
EPR 12
|
Max. speed for Taconite seal | 900 | r/min |
P60° | 185 | kN | |
P90° | 111 | kN | |
P120° | 72.5 | kN | |
P150° | 66.7 | kN | |
P180° | 81.4 | kN | |
Pa | 14 | kN |
Mass pillow block | 45.9 | kg |
Cap bolt |
2 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 1220 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 765.45 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1100104 | 279.4 | 311.15 | 15.88 | Seals |
---|---|---|---|---|
13937 | 34.925 | 76 | 12.7 | Seals |
23168-2CS5/VT143 | 340 | 580 | 190 | Bearings, units and housings |
23230 CC/W33 | 150 | 270 | 96 | Bearings, units and housings |
71902 ACE/P4A | 15 | 28 | 7 | Bearings, units and housings |
85x150x12 HMS5 V | 85 | 150 | 12 | Seals |
BD-C 2212 KTN9-H 312 E | 55 | 110 | 28 | Bearings, units and housings |
FY 40 TF/VA201 | 40 | - | 54.2 | Bearings, units and housings |
G 29x38x4 | 29 | 38 | 4 | Seals |
HK 5022 RS | 50 | 58 | 22 | Bearings, units and housings |
NUP 311 ECM | 55 | 120 | 29 | Bearings, units and housings |
SSAFS 23024 KA x 4.1/16 | 103.1875 | - | - | Bearings, units and housings |
Hot number:
19240
23048 CC/W33
2307 ETN9
27x43x7 HMS5 V
380x418x19 HS8 R
7307 BECBM
NU 1018 M/C3VL0241
NKXR 30
NU 2220 ECM
NUP 2228 ECML
RNA 4906
S71907 ACD/HCP4A
SAF 23036 KATLC x 6.1/2
YET 207-106
W 030
Previous:SAF 1620 x 3.3/8 Bearings, units and housings ---- Next:SAF 1620 x 3.3/8 TLC Bearings, units and housings
Return to SKF bearing