da | 57.15 | mm | |
Da | 120 | mm | |
Ca | 39.014 | mm | |
A1 | 79.375 | mm | |
A2 | 114.3 | mm | |
S | 3.969 | mm | |
ba | 31.75 | mm | |
H | 147.637 | mm | |
H1 | 76.2 | mm | |
H2 | 25.4 | mm | |
J | min. | 206.375 | mm |
J | max. | 241.3 | mm |
L | 279.4 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 44.45 | mm | |
R2 | 15.875 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 27.781 | mm |
Housing |
SAF 513
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-13-0
|
|||
Labyrinth ring |
2 x LER 30
|
|||
|
End plug (suffix Y) |
EPR 6
|
Bearing limiting speed | 7000 | r/min |
P60° | 50.3 | kN | |
P90° | 30.2 | kN | |
P120° | 17.8 | kN | |
P150° | 16 | kN | |
P180° | 19.1 | kN | |
Pa | 6.09 | kN |
Mass pillow block | 10.8 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 102 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 53.865 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
13x26x7 HMSA10 RG | 13 | 26 | 7 | Seals |
---|---|---|---|---|
17x47x10 HMSA10 V | 17 | 47 | 10 | Seals |
20x34x7 HMSA10 V | 20 | 34 | 7 | Seals |
405500 | 495 | - | - | Seals |
6207-ZNR | 35 | 72 | 17 | Bearings, units and housings |
7084 BGM | 420 | 620 | 90 | Bearings, units and housings |
91348 | - | - | 24.28 | Seals |
FY 1.3/4 RM | 44.45 | - | - | Bearings, units and housings |
GB 3011 | - | - | 43 | Bearings, units and housings |
GE 25 ESX-2LS | 25 | 42 | 20 | Bearings, units and housings |
KMK 19 | 20 | - | 95 | Bearings, units and housings |
NCF 29/750 V | 750 | 1000 | 145 | Bearings, units and housings |
Hot number:
22340
22x35x7 HMSA10 RG
23809
25x45x7 HMS5 RG
30x52x7 HMS5 RG
315257 A
48x72x8 HMS5 V
619/1060 MB
6201-2RSH
N 28/900 MB
NNU 49/500 BK/SPW33X
PCMW 142601.5 E
PF 30 RM
SYJ 2. TF
TU 55 TF
Previous:SAF 22513 T Bearings, units and housings ---- Next:SAF 22513 x 2.1/4 T Bearings, units and housings
Return to SKF bearing