da | 77.787 | mm | |
Da | 160 | mm | |
Ca | 49.809 | mm | |
A1 | 98.425 | mm | |
A2 | 149.225 | mm | |
S | 4.763 | mm | |
ba | 40.481 | mm | |
H | 192.484 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 260.35 | mm |
J | max. | 298.45 | mm |
L | 349.25 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing |
SAF 518
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Labyrinth ring |
2 x LOR 186
|
|||
|
End plug (suffix Y) |
EPR 11
|
Bearing limiting speed | 5300 | r/min |
P60° | 121 | kN | |
P90° | 72.5 | kN | |
P120° | 45.4 | kN | |
P150° | 40.5 | kN | |
P180° | 49.8 | kN | |
Pa | 10.9 | kN |
Mass pillow block | 21.4 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
105x130x12 CRW1 V | 105 | 130 | 12 | Seals |
---|---|---|---|---|
140x160x12 HMSA10 RG | 140 | 160 | 12 | Seals |
14500 | 37 | 62 | 10 | Seals |
160 VL V | 144 | - | - | Seals |
6322/HC5C3S0VA970 | 110 | 240 | 50 | Bearings, units and housings |
90849 | - | - | 25.4 | Seals |
GEG 80 ES | 80 | 120 | 80 | Bearings, units and housings |
NA 4901.2RS | 12 | 24 | 13 | Bearings, units and housings |
NUP 315 ECM | 75 | 160 | 37 | Bearings, units and housings |
SAF 1618 x 3.1/8 T | 79.375 | - | - | Bearings, units and housings |
SALKAC 14 M | 14 | - | 19 | Bearings, units and housings |
SONL 244-544 | 200 | - | - | Bearings, units and housings |
Hot number:
1300244
23272 CA/W33
593855
6221-2Z
62x90x10 HMS5 RG
99575
BT2B 334013/HA1
HA 3038
KD2-203
NA 4909 RS
PBM 284035 M1G1
PCMF 151709 E
RNA 4922
SAF 22218 T
SSAFS 23034 KA x 5.15/16
Previous:SAF 22518 TLC Bearings, units and housings ---- Next:SAF 22518 x 3.1/16 T Bearings, units and housings
Return to SKF bearing