da | 88.9 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 222.25 | mm | |
S | 4.763 | mm | |
ba | 44.45 | mm | |
H | 217.488 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
L | 387.35 | mm | |
N1 | 25.4 | mm | |
Threaded holes | |||
R1 | 58.737 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.069 | mm |
Housing |
SAF 520
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-20-17
|
|||
Taconite seal | TER 103 | |||
|
End plug (suffix Y) |
EPR 12
|
Max. speed for Taconite seal | 900 | r/min |
P60° | 136 | kN | |
P90° | 81.4 | kN | |
P120° | 50.7 | kN | |
P150° | 46.3 | kN | |
P180° | 55.6 | kN | |
Pa | 13.8 | kN |
Mass pillow block | 28.1 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1050524 | 266.7 | 317.5 | 15.88 | Seals |
---|---|---|---|---|
110051 | 279.4 | 330.2 | 15.88 | Seals |
211-2Z | 55 | 100 | 21 | Bearings, units and housings |
34x48x8 HMSA10 RG | 34 | 48 | 8 | Seals |
6308/HR11TN | 40 | 90 | 23 | Bearings, units and housings |
630x670x20 HDS1 R | 630 | 670 | 20 | Seals |
91319 | - | - | 49.987 | Seals |
AS 85110 | 85 | 110 | 1 | Bearings, units and housings |
ECCN 050 R | 20 | 154 | - | Coupling systems |
NU 10/560 MA | 560 | 820 | 115 | Bearings, units and housings |
SAF 1522 TLC | 100.0125 | - | - | Bearings, units and housings |
SI 50 TXE-2LS | 50 | - | 35 | Bearings, units and housings |
Hot number:
1208 ETN9
BD-23076 CCK/W33-AOH 3076 G
49990
524768
71919 ACD/HCP4A
BT4B 334011
KMTA 7
N 05
NA 6904
NATR 17 X
NJ 208 ECML
PFT 30 FM
QJ 313 MA
SSAFS 22522 x 4 TLC
W 6209-2RS1
Previous:SAF 22520 x 3.1/2 Bearings, units and housings ---- Next:SAF 22520 x 3.1/2 TLC Bearings, units and housings
Return to SKF bearing