da | 100.013 | mm | |
Da | 200 | mm | |
Ca | 62.789 | mm | |
A1 | 120.65 | mm | |
A2 | 165.1 | mm | |
S | 4.763 | mm | |
ba | 50.006 | mm | |
H | 239.316 | mm | |
H1 | 125.425 | mm | |
H2 | 50.8 | mm | |
J | min. | 320.675 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 67.866 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 45.244 | mm |
Housing |
SAF 522
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-22-19
|
|||
Labyrinth ring |
2 x LOR 109
|
|||
|
End plug (suffix Y) |
EPR 13
|
Bearing limiting speed | 4000 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 17.3 | kN |
Mass pillow block | 33.1 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 232.47 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
12386 | 31.75 | 47.6 | 6.35 | Seals |
---|---|---|---|---|
240x270x15 HMSA10 V | 240 | 270 | 15 | Seals |
61919-2RS1 | 95 | 130 | 18 | Bearings, units and housings |
6210-RSH | 50 | 90 | 20 | Bearings, units and housings |
6324-2RS1 | 120 | 260 | 55 | Bearings, units and housings |
7006 ACD/P4AH | 30 | 55 | 13 | Bearings, units and housings |
708/500 AMB | 500 | 620 | 37 | Bearings, units and housings |
81111 TN | 55 | 78 | 16 | Bearings, units and housings |
KMD 6 | 20 | - | 30 | Bearings, units and housings |
NNTR 50x130x65.2ZL | 50 | 130 | 65 | Bearings, units and housings |
SI 6 C | 6 | - | 6 | Bearings, units and housings |
SY 25 TR | 25 | - | - | Bearings, units and housings |
Hot number:
23134 CCK/W33
31322 X/DF
320x380x30 HDS1 R
55x90x8 HMS5 RG
6305/HR22Q2
7306 BECBY
80x170x13 HMSA10 RG
91376
99160
FYR 1 1/2-18
GB 1020
NJ 2224 ECP
NK 47/20
SAF 22611 T
W 627-2RZ
Previous:SAF 22520 x 3.5/16 TLC Bearings, units and housings ---- Next:SAF 22522 T Bearings, units and housings
Return to SKF bearing