da | 101.6 | mm | |
Da | 200 | mm | |
Ca | 62.789 | mm | |
A1 | 120.65 | mm | |
A2 | 231.775 | mm | |
S | 4.763 | mm | |
ba | 50.006 | mm | |
H | 239.316 | mm | |
H1 | 125.425 | mm | |
H2 | 50.8 | mm | |
J | min. | 320.675 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 67.866 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 45.244 | mm |
End plug (suffix Y) |
EPR 13
|
Max. speed for Taconite seal | 775 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 17.3 | kN |
Mass pillow block | 33.1 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 232.47 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
19062 | 48.4124 | 81 | 7.95 | Seals |
---|---|---|---|---|
2200565 | 558.8 | 609.6 | 22.23 | Seals |
42x72x8 HMS5 V | 42 | 72 | 8 | Seals |
400130 | 11.7 | - | - | Seals |
728 ACD/HCP4A | 8 | 24 | 8 | Bearings, units and housings |
78725 | 200.025 | 234.95 | 25.4 | Seals |
8053 | 20.6502 | 34.93 | 9.53 | Seals |
AN 22 | 20.0914 | - | 109.855 | Bearings, units and housings |
D/W ER1038 | 9.525 | 15.875 | 3.967 | Bearings, units and housings |
NNU 4880/HB1W33 | 400 | 500 | 100 | Bearings, units and housings |
NU 208 ECKP | 40 | 80 | 18 | Bearings, units and housings |
OKC 600 | 600 | - |
Hot number:
BD-23026-2CS5K/VT143-H 3026 E
51213
7004 CE/HCP4A
7012 ACE/HCP4AH1
7018 CD/HCP4AH1
7024 ACE/P4AL
71917 CD/HCP4A
BT4B 328391 G/HA1
FSAF 22516 x 2.3/4
FYNT 55 L
GEC 320 TXA-2RS
GEH 80 ES-2LS
PL 850
RNA 4864
YAR 205-100-2RFGR/HV
Previous:SAF 22522 x 4 Bearings, units and housings ---- Next:SAF 22522 x 4 TLC Bearings, units and housings
Return to SKF bearing