da | 134.938 | mm | |
Da | 269.999 | mm | |
Ca | 82.804 | mm | |
A1 | 158.75 | mm | |
A2 | 279.4 | mm | |
S | 4.763 | mm | |
ba | 65.088 | mm | |
H | 320.675 | mm | |
H1 | 160.325 | mm | |
H2 | 63.5 | mm | |
J | min. | 431.8 | mm |
J | max. | 463.55 | mm |
J1 | 95.25 | mm | |
L | 539.75 | mm | |
N1 | 28.575 | mm | |
Threaded holes | |||
R1 | 95.25 | mm | |
R2 | 39.688 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 50.8 | mm |
Housing |
SAF 530
|
|||
Bearing | ||||
Adapter sleeve assembly | SNW 30x5.5/16 | |||
Stabilizing ring |
SR-30-0
|
|||
Taconite seal | TER 127 | |||
|
End plug (suffix Y) |
EPR 16
|
Max. speed for Taconite seal | 590 | r/min |
P60° | 230 | kN | |
P90° | 138 | kN | |
P120° | 87.2 | kN | |
P150° | 80.1 | kN | |
P180° | 96.1 | kN | |
Pa | 32.7 | kN |
Mass pillow block | 91.6 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 1 | in | |
Initial grease fill | 623.7 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
11879 | 30.1752 | 52.37 | 6.35 | Seals |
---|---|---|---|---|
BD-24056 CCK30/W33-AOH 24056 G | 260 | 420 | 140 | Bearings, units and housings |
28x38x7 HMSA10 V | 28 | 38 | 7 | Seals |
32236T192/DB | 180 | 320 | - | Bearings, units and housings |
35x56x10 HMS5 V | 35 | 56 | 10 | Seals |
596098 | 320.675 | - | - | Seals |
7019 ACB/P4AL | 95 | 145 | 24 | Bearings, units and housings |
71911 ACB/HCP4A | 55 | 80 | 13 | Bearings, units and housings |
85x120x12 CRW1 R | 85 | 120 | 12 | Seals |
AH 314 G | 65 | 70 | 43 | Bearings, units and housings |
FSNL 528 TURU | 125 | - | - | Bearings, units and housings |
K 30x40x18 | 30 | 40 | 18 | Bearings, units and housings |
Hot number:
13582
1875553
19220
248/900 CAMA/W20
315835 A
319440 DA-2LS
35x80x8 CRW1 R
550 VA R
6200
7567
6310-2RSH
6328/C3VL2071
7829
GS 81215
NUP 307 ECML
Previous:SAF 22530 x 5.5/16 Bearings, units and housings ---- Next:SAF 22530 x 5.5/16 TLC Bearings, units and housings
Return to SKF bearing