da | 149.225 | mm | |
Da | 309.999 | mm | |
Ca | 95.809 | mm | |
A1 | 171.45 | mm | |
A2 | 307.975 | mm | |
S | 4.763 | mm | |
ba | 74.612 | mm | |
H | 360.363 | mm | |
H1 | 179.375 | mm | |
H2 | 69.85 | mm | |
J | min. | 492.125 | mm |
J | max. | 549.275 | mm |
J1 | 107.95 | mm | |
L | 628.65 | mm | |
N1 | 28.575 | mm | |
Threaded holes | |||
R1 | 115.888 | mm | |
R2 | 37.306 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 54.769 | mm |
Housing |
SAF 534
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-34-0
|
|||
Taconite seal | TER 139 | |||
|
End plug (suffix Y) |
EPR 18
|
Max. speed for Taconite seal | 520 | r/min |
P60° | 234 | kN | |
P90° | 140 | kN | |
P120° | 85.9 | kN | |
P150° | 77 | kN | |
P180° | 92.5 | kN | |
Pa | 43.6 | kN |
Mass pillow block | 125 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 1 | in | |
Initial grease fill | 878.85 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
10515 | 27 | 38.07 | 6.35 | Seals |
---|---|---|---|---|
140x170x15 HMSA10 RG | 140 | 170 | 15 | Seals |
17607 | 44.45 | 69.01 | 11.13 | Seals |
BD-22215 EK-H 315 | 65 | 130 | 31 | Bearings, units and housings |
36x52x8 CRW1 V | 36 | 52 | 8 | Seals |
417503 | 1632 | - | - | Seals |
6238 M | 190 | 340 | 55 | Bearings, units and housings |
6315 M | 75 | 160 | 37 | Bearings, units and housings |
GEH 35 TXE-2LS | 35 | 62 | 22 | Bearings, units and housings |
MVR1-20 | 20 | 35 | - | Seals |
PSM 182430 A51 | 18 | 24 | 30 | Bearings, units and housings |
SY 1.3/4 TF | 44.45 | - | - | Bearings, units and housings |
Hot number:
13514
16094
19607
51206 V/HR22Q2
5150
6008/HR22T2
6204-2Z/VA228
FYRP 2 15/16
IR 60x70x25 EGS
K 38x43x17
KMD 6
PWM 105120100
SAF 1615
SAF 22513-210
SY 40 TDW
Previous:SAF 22534 x 5.7/8 Bearings, units and housings ---- Next:SAF 22534 x 5.7/8 TLC Bearings, units and housings
Return to SKF bearing