da | 85.725 | mm | |
Da | 215.001 | mm | |
Ca | 82.804 | mm | |
A1 | 120.65 | mm | |
A2 | 254 | mm | |
S | 4.763 | mm | |
ba | 57.944 | mm | |
H | 258.762 | mm | |
H1 | 133.35 | mm | |
H2 | 53.975 | mm | |
J | min. | 336.55 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 79.375 | mm | |
R2 | 30.163 | mm | |
RG | 1/2 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 51.594 | mm |
Housing |
SAF 620
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-24-20
|
|||
Taconite seal | TER 101 | |||
|
End plug (suffix Y) |
EPR 12
|
Max. speed for Taconite seal | 900 | r/min |
P60° | 185 | kN | |
P90° | 111 | kN | |
P120° | 72.5 | kN | |
P150° | 66.7 | kN | |
P180° | 81.4 | kN | |
Pa | 21.8 | kN |
Mass pillow block | 51.3 | kg |
Cap bolt |
2 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 1220 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 379.89 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
320x364x20 HDS2 D | 320 | 364 | 20 | Seals |
---|---|---|---|---|
32311 B | 55 | 120 | 45.5 | Bearings, units and housings |
7038 CD/HCP4A | 190 | 290 | 46 | Bearings, units and housings |
830 VE R | 796 | - | - | Seals |
85019 | 215.9 | 254 | 15.88 | Seals |
87421 | - | - | 63.5 | Seals |
AOH 24072 | 340 | 360 | 206 | Bearings, units and housings |
99284 | 72 | 81.915 | 22.225 | Seals |
GEZM 600 ESX-2LS | 152.4 | 222.25 | 209.55 | Bearings, units and housings |
NKI 90/26 | 90 | 120 | 26 | Bearings, units and housings |
NU 320 ECML | 100 | 215 | 47 | Bearings, units and housings |
SSAFS 22530 T | 131.7625 | - | - | Bearings, units and housings |
Hot number:
11734
26x38x5 HMSA10 V
315040/VJ202
32220/DF
7011 ACE/HCP4AL
7024 ACE/P4A
71828 ACD/HCP4
7202 CD/P4A
BT4B 334028 G/HA1VA901
FSAF 22517 x 2.13/16 TLC
K 81115 TN
PCM 505560 M
PWM 160180180
SY 25 FM
YAR 206-104-2RF/HV
Previous:SAF 22620 x 3.3/8 Bearings, units and housings ---- Next:SAF 22620 x 3.3/8 TLC Bearings, units and housings
Return to SKF bearing