da | 122.237 | mm | |
Da | 299.999 | mm | |
Ca | 111.785 | mm | |
A1 | 171.45 | mm | |
A2 | 307.975 | mm | |
S | 4.763 | mm | |
ba | 78.581 | mm | |
H | 360.363 | mm | |
H1 | 179.375 | mm | |
H2 | 69.85 | mm | |
J | min. | 492.125 | mm |
J | max. | 549.275 | mm |
J1 | 107.95 | mm | |
L | 628.65 | mm | |
N1 | 28.575 | mm | |
Threaded holes | |||
R1 | 115.888 | mm | |
R2 | 37.306 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 65.088 | mm |
Housing |
SAF 628
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-0-28
|
|||
Taconite seal | TER 120 | |||
|
End plug (suffix Y) |
EPR 27
|
Max. speed for Taconite seal | 625 | r/min |
P60° | 234 | kN | |
P90° | 140 | kN | |
P120° | 85.9 | kN | |
P150° | 77 | kN | |
P180° | 92.5 | kN | |
Pa | 42.9 | kN |
Mass pillow block | 134 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 1 | in | |
Initial grease fill | 878.85 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
22344 CCJA/W33VA405 | 220 | 460 | 145 | Bearings, units and housings |
---|---|---|---|---|
470851 | 814 | - | - | Seals |
55x90x10 HMSA10 RG | 55 | 90 | 10 | Seals |
71803 ACD/P4 | 17 | 26 | 5 | Bearings, units and housings |
71920 ACE/P4A | 100 | 140 | 20 | Bearings, units and housings |
FYK 20 TD | 20 | - | - | Bearings, units and housings |
FYTB 50 LDW | 50 | - | - | Bearings, units and housings |
G 28x35x4 | 28 | 35 | 4 | Seals |
NAO 9x22x12 TN | 9 | 22 | 12 | Bearings, units and housings |
NU 2215 ECP | 75 | 130 | 31 | Bearings, units and housings |
OKC 800 | 800 | - | ||
SY 25 TR | 25 | - | - | Bearings, units and housings |
Hot number:
14974
45150
407203
6000/HR22T2
7022 CD/P4AL
GRA 3040
NKI 100/40
NUP 19/600 ECMA/HA1
NUP 311 ECJ
PBMF 182512 M1G1
PCM 050708 E
QJ 212 MA
SAW 23544 x 7.1/2 TLC
SNW 120x3.5/16
SYNT 70 FTS
Previous:SAF 22628 x 4.13/16 Bearings, units and housings ---- Next:SAF 22630 x 5.1/4 Bearings, units and housings
Return to SKF bearing